Panasonic PT-61DX80 Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} Panasonic PT-61DX80. Panasonic PT-61DX80 26 pagina's. Color video projection system
Pagina afdrukkenINSTALLA
TION
Installation
Television
Location
This unit can be used as part of an entertainment
center.
Consult
your dealer
for
available
options.
[3
Avoid excessive sunlight or bright lights, including reflections.
[3
Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.
[3
Fluorescent lighting may reduce remote control transmitting range.
[3
Keep away from magnetic equipment, including motors, fans and external speakers.
Optional
Cable
Connections
Shielded audio and video cables should be used between components.
For best
results:
[3
Use 75-ohm coaxial shielded cables.
[3
Use appropriate input and output connectors, that match your component connectors.
[3
Avoid long cables to minimize interference.
AC Power
Supply
Cord
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT.
DO NOT USE A PLUG WITH A
RECEPTACLE
OR OTHER
OUTLET
UNLESS
THE
BLADE
CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
Polarized
plug
Cable
_ Anterma
Connection
For proper
reception,
either a cable or antenna
connection
is required.
Cable Connection
Incoming Cable from
Cable Company
Connect
the cable supplied
by your local cable company
to ANT1
connection
on back of television.
Select cable mode and ANT1
in
SET UP menu under
Prog Chan (Program
Channels).
_) 4_)
Note:
A cable converter box may be required for proper reception.
75OhmVHF/UHF
Check
with
your
local
cable
company
for
compatibility
on backofTV
requirements.
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna is required. For
best reception, an outdoor antenna is recommended.
Connect home antenna to ANT1 connection
on back of
television. Select TV mode and ANT1 in the SET UP menu
under Prog Chan.
--
--
Cable Preset
Cable
Mode
is
preset
at
the
factory.
Antenna users must change to TV mode and
ANT1 in the Set Up Menu under Prog Chan.
Incoming
Cable from
Home Antenna
D