Panasonic PT-AE4000 Functionele instructies - Pagina 5
Blader online of download pdf Functionele instructies voor {categorie_naam} Panasonic PT-AE4000. Panasonic PT-AE4000 50 pagina's. Projector lineup
Ook voor Panasonic PT-AE4000: Specificatieblad (10 pagina's)
Pagina afdrukken
Projection method
You can use the projector with any of the following 4 projection methods. To set the projector in the desired
method, see "INSTALLATION" on page 39.
Setting on a desk/floor and
J
projecting from front
INSTALLATION: FRONT/DESK
Mounting on the ceiling and
J
projecting from front
INSTALLATION: FRONT/CEILING
NOTE:
•
A translucent screen is required for rear projection.
•
When mounting the projector on the ceiling, the optional ceiling mount bracket (ET-PKE2000, ET-PKE1000S) is required.
•
See "Ceiling mount bracket safeguards" in "Technical Information" of the operating instructions.
Front leg adjusters and throwing angle
You can screw up/down the front leg adjusters to control the angle of the projector for adjusting the throwing angle.
See "Positioning the image" on page 12.
NOTE:
•
Heated air comes out of the air exhaust port. Do not touch the air exhaust port directly.
•
If keystone distortion occurs, see "KEYSTONE" on page
•
Screw up the front leg adjusters, and an audible click will be heard as the limit.
Setting on a desk/floor and
J
projecting from rear
INSTALLATION: REAR/DESK
Mounting on the ceiling and
J
projecting from rear
INSTALLATION: REAR/CEILING
34.
Setting up
E
NGLISH - 5