Panasonic PT-D6000E Gebruiksaanwijzing - Pagina 37
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic PT-D6000E. Panasonic PT-D6000E 42 pagina's. Dlp based projector commercial use
Pagina afdrukken
S-VIDEO IN
VIDEO IN
RGB 1 IN
Terminals
RGB 2 IN
DVI-D IN
SERIAL
REMOTE1
REMOTE2
LAN
SDI
Cabinet
Mains lead length
Dimensions
Weight
Power supply
Operating range
Weight
Remote
control
Dimensions
Ceiling bracket
Projection lens
Options
Lamp unit
ACF unit
*1. When STANDBY MODE in PROJECTOR SETUP menu is NORMAL: Approx. 9 W
When STANDBY MODE in PROJECTOR SETUP menu is ECO: Approx. 0.3 W
*2. Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*3. When using this projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level, temperature will be 5 °C lower than this
higher limit.
*4. See "List of compatible signals" on page 34 for available signals.
*5. When using the ET-DLE055 lens, maximum projection size is 200 inch.
*6. Average value. Each product (inc. lens) has an individual variable in weight.
1 set, Mini DIN 4p
Y: 1.0 V [p-p], C: 0.286 V [p-p], 75
1 set, BNC pin jack
Ω
1.0 V [p-p], 75
1 set, BNC x 5
RGB signal
Ω
0.7 V [p-p], 75
•
G-SYNC: 1.0 V [p-p], 75
•
HD/SYNC: TTL high impedance, automatic positive/negative polarity compatible
•
VD: TTL high impedance, automatic positive/negative polarity compatible
YP
P
signal
B
R
•
Y: 1.0 V [p-p] Synchronisation signal included
Ω
•
P
P
: 0.7 V [p-p], 75
B
R
1 set of high density, D-sub 15p (female)
RGB signal
Ω
0.7 V [p-p], 75
(G-SYNC: 1.0 V [p-p], 75
•
HD/SYNC: TTL high impedance, automatic positive/negative polarity compatible
•
VD: TTL high impedance, automatic positive/negative polarity compatible
YP
P
signal
B
R
•
Y: 1.0 V [p-p] Synchronisation signal included
Ω
•
P
P
: 0.7 V [p-p], 75
B
R
1 set, DVI-D 24-pin (Single link), DVI 1.0 compatible, HDCP compatible
1 set, D-sub 9-pin, RS-232C compatible, computer control use
1 set, M3 pin jack, wired remote control use, multiple connection use
1 set, D-sub 9-pin, external control use
1 set, RJ-45, network connection use, PJLink™ compatible,
10 Base-T/100Base-TX
1 set, BNC
SD-SDI (Y, C
, C
, 4:2:2)
B
R
•
SMPTE259M: 480i, 576i
Moulded plastic
3.0 m (9'10")
Width
Height
Length
*6
Approx. 16 kg (35.3 lbs.)
3 V DC (AA battery x 2)
Approx. 30 m (98'5") (when operated directly in front of signal receptor)
120 g (4.2 ozs.) (including batteries)
Width
Length
Height
ET-PKD56H (High ceiling), ET-PKD55S (Low ceiling)
ET-DLE150, ET-DLE250, ET-DLE350, ET-DLE450, ET-DLE055
ET-LAD60 (1 bulb), ET-LAD60W (2 bulbs)
ET-ACF100
Technical Information
Ω
, compatible with S1 signal
Ω
Ω
)
•
SMPTE292M: 720/50p, 720/60p, 1 035/60i,
1 080/50i, 1 080/60i, 1 080/25p, 1 080/24p,
1 080/24sF, 1 080/30p
498 mm (19- 19/32")
175 mm (6 - 7/8")
440 mm (17 - 5/16")
51 mm (2')
176 mm (6 - 29/32")
22.7 mm (-7/8") (not including surface projection
parts)
E
NGLISH - 37