Diamond Tech G2 Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Diamond Tech G2. Diamond Tech G2 8 pagina's. Bottle cutter

Pagina afdrukken
g
2
bottle cutter
generaTion green boTTle CuTTer for eCo CrafTing
Congratulations on buying the Generation Green (
closer to "crafting a green world together."
What is "crafting a green world?" It is an attempt to create craft projects using reused, recycled and natural materials.
With the Generation Green (
bottles and jars into functional and fun art.
Let's get started!
beFORe yOU beGIN
Read and carefully following the instructions contained within this manual. If you do, you will have success in scoring and
separating nearly any round bottle or jar! Your kit should contain (1) bottle cutter, (1) tapper, (1 each) 60 and 120 grit
emery paper, (1) instruction booklet.
• After unpacking all components, assemble the Generation Green (
• Always wear safety goggles when using glass crafting tools. Everyday eyeglasses do not have impact
resistant lenses.
• Kit contains small parts, keep out of reach of children.
• To ensure top performance keep your bottle cutter blade oiled.
OIl
ThE gLASS CuTTER WhEEL muST BE oILED WITh A SmALL AmouNT oF ANY LIghT oIL. ThIS IS ESSENTIAL
To INSuRE A gooD SCoRE. RE-oIL WhEEL EvERY 2 oR 3 CuTS. ThE oIL IS NECESSARY FoR pRopER
CuTTINg ACTIoN.
CleAN GlAss
Remove all labels. Remove dirt and glue residue using a glass cleaner or a mixture of vinegar and water before cutting.
Dirt or glue residue will dull the glass cutter and prevent a good score.
ADJUsTING CUTTeR TO bOTTle
place the Generation Green (
the glass cutter wheel along part A until it rests against the bottle. Next, slide part E up or down to the height desired - the
glass cutter should be at a 90° angle to the glass. Tighten the double wing nuts (part D) to secure in place.
this
g
2
g
2
) bottle cutter you have taken an active part in this movement through repurposing
g
2
) bottle cutter cone into the neck of the bottle, loosen the wing nuts on part D. Slide
not
this
) bottle and jar cutter. Your purchase has brought us one step
g
E
D
cone
B
4
2
) bottle cutter on a firm level surface.
note how hands
are used
A
three wing nuts
are loose
glass cutter
not
a pr
angle to bottle