Panasonic PT-F200NTE/PT-FW100NTE Gebruikershandleiding - Pagina 31

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Panasonic PT-F200NTE/PT-FW100NTE. Panasonic PT-F200NTE/PT-FW100NTE 49 pagina's. Network function edition

Pagina afdrukken

Network setting of the projector

Additionally perform the following setting using the [AUTHENTICATION] setting.

WIRELESS DETAILED SETUP

USER1

DEFAULT KEY

KEY1

KEY2

KEY3

RETURN

KEY4

SELECT

RETURN

When setting [OPEN] or [SHARED] as authentication and setting [WEP

DEFAULT KEY : Set 1 – 4 numerals for the default key.

KEY 1 – 4

: Set these to match the WEP key registered in [DEFAULT KEY].

Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit

string for the hexadecimal format) for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the

hexadecimal format).

When setting [WPA-PSK

Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.

※ "Glossary" (See page 45)

Important video/audio data is protected because AES

even if [ENCRYPTION] is set to [NONE].

※ "Glossary" (See page 45)

Default settings of [USER1]-[USER3]

The following settings as [USER1]-[USER3] in the wireless LAN are set before the projector leaves the factory.

SSID

: Panasonic Projector

DHCP

: OFF

IP ADDRESS

: 192.168.11.100

SUBNETMASK

: 255.255.255.0

GATEWAY

: 192.168.11.1

MODE

: AD HOC

AUTHENTICATION : OPEN

ENCRYPTION

: NONE

3/3

＊＊＊＊＊＊＊＊

CANCEL

※

] as authentication : Set key and select [OK].

※

(cont.)

] as the encryption method:

※

encryption processing takes place in advance for all network numbers,