Panasonic PT-L6510E Gebruiksaanwijzing - Pagina 44
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic PT-L6510E. Panasonic PT-L6510E 50 pagina's. 3600 ansi lumens sxga lcd projector 4200 ansi lumens xga lcd projector
Ook voor Panasonic PT-L6510E: Brochure & specificaties (6 pagina's)
Pagina afdrukken
Replacing the lamp unit
8. Insert the power cord plug into the wall outlet and then press the MAIN POWER switch.
Caution
• If the power does not turn on even after turning the MAIN POWER switch "I", turn the MAIN POWER "O",
confirm that the lamp unit and door are installed correctly, and turn on again.
9. Press the "POWER" button so that a picture is projected onto the screen.
10. Press the "MENU" button to display the
MAIN MENU screen, and then press the
and
buttons to move the cursor to
select "OPTION2".
11. Press the "ENTER" button to display the
"OPTION2" screen, and then use the
a n d
b u t t o n s t o s e l e c t " L A M P
RUNTIME".
12. Press and hold the "ENTER" button on
the projector or the remote control for
approximately 3 seconds.
The "LAMP RUNTIME" will change to "L1 RESET
[POWER OFF]" or "L2 RESET [POWER OFF]".
Note
• If the "MENU" button is pressed, the lamp time
resetting screen will be cancelled.
13. Press the
L1 RESET: Replace the LAMP1
L2 RESET: Replace the LAMP2
L1+L2 RESET: Replace the LAMP1 & LAMP2
14. Press the POWER button to turn off the power.
This will reset the cumulative usage time for the lamp unit to zero.
44
and
buttons to select for replacement lamp setting.
MENU
INDEX WINDOW
PICTURE
POSITION
AUDIO
ZOOM/FOCUS
LANGUAGE
OPTION 1
OPTION 2
SELECT
ENTER
OPTION 2
LAMP POWER
HIGH
LAMP SELECT
DUAL
LAMP RUNTIME
1
1820 H
FUNCTION 1
MUTE
SET ID
ALL
USER MODE
SELECT
ADJ
ESC
OPTION 2
LAMP POWER
HIGH
LAMP SELECT
DUAL
[ POWER OFF ]
L1 RESET
FUNCTION 1
MUTE
SET ID
ALL
USER MODE
SELECT
ADJ
ESC