Panasonic PT-L750E Gebruiksaanwijzing - Pagina 12

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic PT-L750E. Panasonic PT-L750E 36 pagina's. Wired and wireless/portable projector
Ook voor Panasonic PT-L750E: Brochure & specificaties (4 pagina's)

Pagina afdrukken

Connections

Notes on connections

B Read the instruction manual for each system component carefully before
connecting it.
B Turn off the power supply for all components before making any
connections.
B If the cables necessary for connecting a component to the system are not
included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.
B If there is a lot of jitter in the video signal which is input from the video
source, the picture on the screen may flicker. In such cases, it will be
necessary to connect a TBC (time base corrector).
B The projector has built-in speakers. However, you will need to connect a
separate audio system to the AUDIO OUT jack if your needs specify high
sound volumes. No sound will come out of the projector's built-in speakers
while the AUDIO OUT jack is being used.
B It may not be possible to connect some types of computer. Refer to the list
of compatible signals on page 61.
B The pin layout and signal names for the S-VIDEO IN connector are shown
below.
#
$
&
%
External view
B The pin layout and signal names for the RGB/YP
connector are shown below.
-
1
(
,
#
'
External view
Pin + is spare.
Pins &–*, , and - are for earth.
Pins . and 1 functions are only valid when
supported by the computer
22-E
NGLISH
Pin No.
Signal
#
Earth (Luminance signal)
$
Earth (Colour signal)
%
Luminance signal
&
Colour signal
P
(RGB1 IN/RGB2 IN)
B
R
Pin No.
Signal
#
R/P
R
$
G/G·SYNC/Y
%
B/P
B
.
SDA
/
HD/SYNC
0
VD
1
SCL
B The pin assignments on the DVI-D input connector are as follows
(interface with TMDS connector on a personal computer)
:
2
*
View from mating side
Pin No.
Signal
#
T.M.D.S data 2-
$
T T.M.D.S data 2+
%
T.M.D.S data 2/4 shield
&
T.M.D.S data 4-
'
T.M.D.S data 4+
(
DDC clock
)
DDC data
*
-
+
T.M.D.S data 1-
,
T.M.D.S data 1+
-
T.M.D.S data1/3 shield
.
T.M.D.S data 3-
3
+
#
Pin No.
Signal
/
T.M.D.S data 3+
0
+5 V
1
Ground
2
Hot plug sense
3
T.M.D.S data 0-
4
T.M.D.S data 0+
5
T.M.D.S data 0/5 shield
6
T.M.D.S data 5-
7
T.M.D.S data 5+
8
T.M.D.S clock shield
9
T.M.D.S clock+
:
T.M.D.S clock-
E
-23
NGLISH