Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls Gebruiksaanwijzing - Pagina 13
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls. Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls 33 pagina's. Micro portable wireless xga lcd projector
Ook voor Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform Wrls: Specificaties (4 pagina's)
Pagina afdrukken
Turning on the power
Before turning on the power
1, Ensure that all peripheral
devices are connected
properly.
2, Remove the lens cover.
$
POWER
INPUT
VIDEO
RGB
&
AUTO
MENU
SETUP
ENTER
FREEZE
SHUTTER
(
STD
VOLUME
D.ZOOM
INDEX
WINDOW
Power indicator
PROJECTOR
Lens cover
#
Connect the accessory power cord to the AC IN
socket.
BThe power indicator on the projector will illuminate red.
$
Press the POWER button.
BThe power indicator on the projector will flash green. After a short
period, the indicator will illuminate green, and a picture will be
projected.
%
Turn on the power of all connected devices.
BStart the play function of a device such as a DVD player.
NOTE:
B If the power cord was disconnected during projection when the projector
was used the last time, projection will start after the mains lead is
connected (when "POWER MEMORY" in the "OPTION2" menu is set to
"ON"). Refer to page 46 for details.
B A tinkling sound may be heard when the lamp unit is turned on, but this
is not a sign of a malfunction.
24-E
NGLISH
#
Power cord
)
*
'
&
Press the input select button to select the
input signal.
Input select
buttons
Changing
signals
BA picture will be projected in accordance with the selected input
signal.
BWhen a YP
P
signal is being input, "YP
B
R
instead of "RGB".
B"NETWORK" is for PT-LB10NTU only.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
'
Adjusting the angle
BWhile pressing the adjuster buttons,
adjust the forward/back angle of tilt
of the projector. Adjust so that the
projector is as vertical to the screen
as possible.
(
Press the AUTO SETUP button to initiate
automatic positioning.
BThe tilt of the projector and the input
signal will be detected and keystone
distortion and the position of the
image will be corrected.
(Refer to page 28 for details.)
)
Adjusting the size
BTurn the zoom ring to adjust the size of the projected image.
*
Adjusting the focus
BTurn the focus ring to adjust the focus of the projected image.
VIDEO
RGB
P
" will be displayed
B
R
AUTO SETUP
E
-25
NGLISH