Panasonic CS-PMX100 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic CS-PMX100. Panasonic CS-PMX100 24 pagina's.

Pagina afdrukken

Network settings

You can stream music from an iOS device (iPhone/iPad/

iPod), an Android™ device or a PC (Mac/Windows) to

this system's speakers by using the Qualcomm

AllPlay™ smart media platform, DLNA feature, or

AirPlay. To use these features, this system must join the

same network as the compatible device.

• Please update the system's software after the network

settings are complete. (

17)

Choose a network setting method from the

following.

Wireless LAN connection

Method 1: "Using the WAC (Wireless

Accessory Configuration)" (

• If you are using an iPhone/iPad/iPod touch (iOS

version 7.0 or later), or Mac (OS X 10.9 or later,

with AirPort Utility 6.3.1 or later), you can sent its

Wi-Fi configuration to this system.

Method 2: "Using an Internet browser"

(

right)

• You can access this unit's network settings from

the Internet browser on your smartphone or PC,

etc.

Method 3: "Using WPS (Wi-Fi Protected

Setup™)" (

• If your wireless router supports WPS, you can set

up a connection by either pressing the WPS

button, or entering the WPS PIN code.

Wired LAN connection

Method 4: "Using a LAN cable" (

• You can make a stable connection to the network

with a LAN cable.

Note:

• The setting will be cancelled after the set time limit. In that

case, try the setting again.

To cancel this setting in the middle, press [∫].

Wireless LAN connection

This system has built-in Wi-Fi

a wireless router.

Preparation

• Place this system as close to the wireless router as

possible.

• Do not connect a LAN cable. Doing so will disable the

Wi-Fi

function.

• Point the antenna on the rear of

the main unit up as shown in the

figure.

• Do not perform the following:

- Tilting the antenna forward or

backwards when it is pointing up

- Applying too much force to the

antenna

- Carrying this unit by holding the antenna

Turn this system on.

Proceed to "Method 1", "Method 2" or

"Method 3".

Method 1:

Using the WAC

right)

(Wireless Accessory Configuration)

• The following explanations are based on an iPhone.

Connect the iPhone to your home wireless

network.

Press [RADIO, EXT-IN] on the remote control

repeatedly to select "Network".

• When "WAC Mode" is indicated on the display, proceed

to step 3.

– If the display stays at "Network", perform the

operation for network reset. (

Go to Wi-Fi settings on your iPhone.

Select "Panasonic PMX100

"SET UP NEW AIRPLAY SPEAKER...".

• "

" stands for a character that is unique to each set.

and can be connected to

18)

Settings

Wi-Fi settings

" under the

The "AirPlay Setup" screen appears on your

iPhone.

• This system will be displayed as "Panasonic PMX100"*.

* To change the name, enter a new name to replace

the existing one.

You can also do the renaming after the network

connection is set up. (

8, "To make network-related

settings")

• You can set a password for this system under

"SPEAKER PASSWORD".

(You will need this password if you make network

settings by Internet browser next time.)

Select "Next" to apply the settings.

• On the main unit's display, "Success" appears when

the connection is established. ("

displayed.)

Method 2:

Using an Internet browser

• The following explanations are based on a

smartphone.

Press [RADIO, EXT-IN] on the remote control

repeatedly to select "Network".

Press [SETUP] on the remote control repeatedly

to select "Net Setup" and then press [OK].

Press [3, 4] on the remote control to select

"Manual" and then press [OK].

Press [2, 1] on the remote control to select

"OK? Yes" and then press [OK].

• After pressing [OK] to confirm "OK? Yes", the previous

network connection you have set with this unit will be

cleared.

"Setting" blinks on the display.

Go to Wi-Fi settings on your compatible device.

Settings

" will be

Wi-Fi settings