Panasonic DVDCP67 - DIG. VIDEO DISC PLAY Gebruiksaanwijzing - Pagina 20

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic DVDCP67 - DIG. VIDEO DISC PLAY. Panasonic DVDCP67 - DIG. VIDEO DISC PLAY 24 pagina's. Dvd/cd player
Ook voor Panasonic DVDCP67 - DIG. VIDEO DISC PLAY: Gebruiksaanwijzing (24 pagina's), Gebruiksaanwijzing (32 pagina's), Gebruiksaanwijzing (29 pagina's), Beknopte handleiding (2 pagina's)

Panasonic DVDCP67 - DIG. VIDEO DISC PLAY Gebruiksaanwijzing
}
Troubleshooting guide
LAA
Picture
Picture distorted.
No picture,
The picture shown on the
television is not normal.
(The sides ol the picture are cut
off or black bands appear at the
top and bottom of the screen.)
([DVD-CP87] The picture is
stretched horizonta!ly.)
-e—a
A
ee
ee
A
ee
ma
i
ee,
eSome distortion is normal during SEARCH,
*Ensure that the equipment is connected properly.
Make sure the television is on.
_*Ensure the television's video input setting (e.9., VIDEO 1) is correct.
eGo to the Video menu in the SETUP screen, and change "TV Aspect" to suit your television.
You may also need to change the screen mode on the television itself.
eEnsure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
The 4:3 TV ZOOM function is on.
E
e[Dvo-cPs7)
Use the television to change the aspect to the correct one.
Reference
=
8 RQT6519
If your television cannot change the aspect when input is progressive
Press [PROGRESSIVE OUT] so the indicator goes out. Output will now be interlace.
*[Dvo-cP67]
You cannot view progressive video if your television is not compatible.
Press [PROGRESSIVE OUT] to turn progressive output off. This problem is caused by the editing
method or material used on the DVD-Video, but should be corrected if you use interlace output.
There is ghosting when
progressive output is on.
Picture quality is poor.
eCheck the settings in the On-Screen Menu Icons' Video menu.
=
j
| Adjust the horizontal position in the On-Screen Menu Icons' Video menu.
The picture is off center when
progressive output is on.
e You inserted a disc the unit cannot play; insert one it can.
e Disc is dirty. Wipe the disc clean,
e Trouble is likely to have occurred. The number following "H" depends on the status of the unit.
Reset procedure:
Press [POWER Ù] to switch the unit to the standby mode and then back to ON. Alternatively,
press [POWER (b] to switch the unit to the standby mode, disconnect the AC power supply
cord, and then reconnect it.
f
elf the service numbers fail to clear, note the service number and contact a qualified service person.
eee
OO stands for a number.
Television displays
"The progressive out is set to
_"Disable""
"The software has a 4:3 aspect
ratio"
"No on-screen display.
On-screen displays (including —
On-Screen Menu icons and disc
type information screen) not
displayed or partially displayed.
The disc's menu is displayed in
a different language.
eGo to the Video menu in the SETUP menus, and select "Enable" in "Progressive Out".
e Use the television to change the aspect to the correct one.
tf your television cannot change the aspect when input is progressive.
Press [PROGRESSIVE OUT) so the indicator goes out. Output will now be interlace.
_*Go
to Display in the SETUP menus, and select "On" for "On-Screen Messages".
ePress [DISPLAY], and press [<4, >] to highlight the rightmost icon, then press [4, Y] to adjust
the position.
~ eGo to Disc in the SETUP menus, and select the preferred language for "Menus".