Panasonic DVDCP72 - DIG. VIDEO DISC PLAY Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic DVDCP72 - DIG. VIDEO DISC PLAY. Panasonic DVDCP72 - DIG. VIDEO DISC PLAY 28 pagina's. Dvd home players
Ook voor Panasonic DVDCP72 - DIG. VIDEO DISC PLAY: Beknopte handleiding (2 pagina's)
Pagina afdrukken
Connection
Connection to a television
This page explains how to connect the unit to a television and set it up so you hear the audio through the television's speakers. To get the full benefit from
the powerful multi-channel audio found on DVDs, you should connect an amplifier and speakers (
Before connection
≥Disconnect the AC power supply cord.
≥Refer to the television's operating instructions.
Basic connection to a television
To household AC
outlet
(AC 120 V, 60 Hz)
AC power
supply cord
(included)
DIGITAL AUDIO OUT
( PCM/BITSTREAM )
~
AC IN
Enjoying higher picture quality
COMPONENT
VIDEO OUT
(480P/480I)
P
Y
B
P
R
VIDEO OUT
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive output and provide
a purer picture than the S VIDEO OUT terminal. Connection using these terminals
outputs the color difference signals (P
order to achieve high fidelity in reproducing colors.
≥The description of the component video input terminals depends on the television
or monitor (e.g. Y/P
Connect to terminals of the same color.
≥After making this connection, change the black level for a better picture.
(
page 21, Video—Black Level Control)
When making this connection, ensure you connect the audio cables to the corresponding audio input terminals on the television.
To enjoy progressive video
≥Connect to the component video (480P) input terminals on a television compatible with this unit's copy guard system. (Video will not be displayed
correctly if connected to an incompatible television.)
≥In QUICK SETUP, set "Progressive Out" to "Enable" (
For your reference
≥All televisions manufactured by Panasonic and that have 480P input connectors are compatible. Consult the manufacturer if you have another
brand of television.
6
Television
AUDIO
VIDEO
IN
IN
L
R
red white yellow
Audio/video
cable
(included)
red white yellow
COMPONENT
AUDIO OUT
VIDEO OUT
5. 1ch
2ch
(480P/480I)
SURROUND
FRONT
CENTER
L
L
L
P
B
OPTICAL
SUB-
R
R
R
P
R
WOOFER
SURROUND
FRONT
Video cable
(not included)
/P
) and luminance signal (Y) separately in
B
R
/P
, Y/B-Y/R-Y, Y/C
/C
).
B
R
B
R
Connect your unit directly to your television.
Do not connect the unit through your video cassette recorder when
setting up your home entertainment system, because the picture may
not be played correctly due to the copy guard.
Conserving power
This unit consumes a small amount of power, even when it is turned
off. (approx. 2.5 W)
To save power when the unit is not to be used for a long time, unplug it
from the household AC outlet.
You can connect the audio cable to the
2-channel audio input terminals of an
analog amplifier or system component
to enjoy stereo or Dolby Pro Logic.
Y
VIDEO OUT S VIDEO OUT
Television
COMPONENT
VIDEO IN
Y
P
B
P
R
page 9).
page 7).
S video cable
(not included)
S VIDEO OUT
S VIDEO OUT terminal
The S video terminal achieves a more vivid picture than
the VIDEO OUT terminal by separating the chrominance
(C) and luminance (Y) signals. (Actual results depend on
the television.)
Television
S VIDEO
IN