Panasonic RX-DT610 Gebruiksaanwijzing - Pagina 20

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic RX-DT610. Panasonic RX-DT610 46 pagina's. Portable stereo component system

Pagina afdrukken

RECORDING (Deck 1)

Your attention is drawn to the fact that recording

pre-recorded tapes or discs on other published or

broadcast material may infringe copyright laws.

mM Edit pause recording

(For preventing a track from being recorded over two sides

of a tape)

"Edit pause" is a function when recording from a CD onto

HSITONA

both sides of a tape. !t prevents a track from being in-

terrupted by the end of the tape. This unit comes with a

function which displays the total playing time of the tracks on

the CD being played. So the tracks can be selected to fit the

length of the tape used. For example onto the C-46 type

tape the tracks can be recorded so as not exceed 23 min-

utes for each side.

"Edit pause" cannot be used together with CD repeat play.

"Edit pause" function does not operate during the tape play-

back mode.

Before operation:

Check that the tape's accidental record prevention tabs are

intact.

Forward the tape past the leader tape.

Press the operation switch to turn on the unit.

Press the CD button of the function select buttons.

Press the CD eject button to insert the CD, then close the

cover.

. Press the eject button

of the deck

1 to insert the

recording tape, then close the cover.

. Press one

of the skip/search

buttons

to specify the

desired

track

to record

side A, then

press

the

memory/recall button.

The program indicator will appear and total playing time

will display.

Program indicator

Total playing time

6. Repeat the step 5 for as long as the recording time on

one side of the tape is not exceeded.

Try reserving one more track to see whether it will fit in. If

it exceeds the recording time on one side of the tape,

press the stop/clear button to cancel the track reserved

last.

7. Press the edit pause button, and then press the memory/

recall button.

The pause indicator will appear.

Pause indicator

8. Press one of the skip/search buttons to specify the de-

sired track to record on side B, then press the memory/

recall button.

The total time for the tracks to be recorded on side B of

the tape is displayed next.

9. Press the record button of the deck 1.

The disc play will begin in selected sequence, and also

recording will begin. The CD player is automatically set to

the pause mode when the tracks reserved on tape side A

have been played through. The tape continues in the

recording mode (although no sound is recorded) until its

end. After that, press the eject button to turn over the

tape, and then press the record button. A non-recorded

passage of about 13 seconds will be automatically cre-

ated, and then the tracks reserved on tape side B will

start playing to be recorded.

Press the stop/eject button of deck 1 and stop/clear button

of the CD section.

Synchro start function

This unit is provided with a synchro-start function which

starts disc play when the record button is pressed.