Panasonic SA-AK250 Gebruiksaanwijzing - Pagina 12

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic SA-AK250. Panasonic SA-AK250 20 pagina's. Panasonic cd stereo system operating instructions
Ook voor Panasonic SA-AK250: Gebruiksaanwijzing (20 pagina's)

Pagina afdrukken
Panasonic SA-AK250 Gebruiksaanwijzing

FM/AM radio

TUNER /
Manual tuning
Manual tuning
BAND
1
Press [TUNER / BAND] to select "FM" or "AM".
2
Press [PLAY MODE] to select "MANUAL".
3
Press [4,
frequency of the required station.
"
" is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press and hold [4,
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4,
[¢,
/ FF ] once again.
To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO"
disappears.
• MONO is also canceled if the frequency is changed.
• Turn off "MONO" for normal listening.
TUNER
AM allocation setting
FM/AM
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
To change the step from 9 kHz to 10 kHz
1
Press and hold [TUNER, FM/AM].
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
2
Continue to hold down [TUNER, FM/AM].
• When the minimum frequency changes, release
the button. To return to the original step, repeat the
above steps.
• After changing the setting, previously preset
frequency will be cleared.
12
RQT8043
/ REW] or [¢,
/ FF ] to select the
/ REW ] or [¢,
/ FF ] until the
/ REW ] or
TUNER /
Memory preset
Memory preset
BAND
20 FM and 15 AM stations can be preset.
Preparation
Press [TUNER / BAND] to select "FM" or "AM".
Automatic presetting
1
Tune to the frequency where presetting is to begin.
2
Press and hold [PROGRAM] to start presetting.
The tuner presets all the stations it can receive into the
channels in ascending order. When fi nished, the last station
memorized is tuned in.
Manual presetting
Press [PLAY MODE] to select "MANUAL".
1
Press [4,
/ REW] or [¢,
2
required station.
Press [PROGRAM].
3
Press the numeric buttons to select a channel.
4
For channels 10 to 20 press [h10], then the two digits.
The station occupying a channel is erased if another
station is preset to that channel.
Selecting a preset station
Press the numeric buttons to select the channel.
OR
Press [PLAY MODE] to select "PRESET".
1
2
Press [4,
/ REW] or [¢,
channel.
/ FF ] to tune to the
/ FF ] to select the