Panasonic SA-AK28 Gebruiksaanwijzing - Pagina 28

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic SA-AK28. Panasonic SA-AK28 32 pagina's. Cd stereo system model no. sc-ak28; sc-ak18

Pagina afdrukken

For Australia and

New Zealand

For United Kingdom

RQT5265

Using the timer

Using the play/record timer

To check settings

While the unit is on and the "rPLAY" (or "rREC") indicator is on,

press [CLOCK/TIMER] so "rPLAY" (or "rREC") appears on the

display.

Two seconds after "rPLAY" (or "rREC") appear, the settings are

displayed in the following order:

•

For play timer

1 Play start time

2 Play finish time

3 Play source

4 Playback volume

You can check the settings even when the system is OFF by pressing

[CLOCK/TIMER].

To enjoy the desired source after the timer setting is completed

The volume level (for play timer) and music source are stored in the

timer memory and the timer will start in these preset conditions.

However, the Disc numbers and reverse mode do not get stored in

the timer memory.

1. After step 5, start playing the desired source.

2. Reset the Disc numbers and reverse mode if you have changed

any of them, confirm that a Disc or cassette is inserted, then press

[f/ I] to put the unit on standby.

Turning the timer ON/OFF

One of the timers is on when the [rPLAY/rREC] indicator is alight.

When the unit is on (or off and in NORMAL mode) you can confirm

which is on by checking which indicator is on the display.

When the unit is off and in ECO mode, press [CLOCK/TIMER]. The

display will then show which timer is on and the settings that have

been made (see above).

To change the timer, press [rPLAY/rREC].

Each time the button is pressed the setting changes as follows.

PLAY

REC

(OFF)

Notes

•

If you switch the system to the standby mode while the play/record

timer is functioning, the OFF time setting will not be activated.

•

If AUX is selected as the source, when the timer comes ON, the

system will turn ON and will engage "AUX" as the source. If you

want to playback or record from a connected component, set the

component's timer to the same time. (See the instruction manual

that came with the component.)

•

For record timer

1 Recording start time

2 Recording finish time

3 Recording source