Panasonic SCAK320 - MINI HES W/CD PLAYER Gebruiksaanwijzing - Pagina 12
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic SCAK320 - MINI HES W/CD PLAYER. Panasonic SCAK320 - MINI HES W/CD PLAYER 20 pagina's. Cd stereo system
Ook voor Panasonic SCAK320 - MINI HES W/CD PLAYER: Gebruiksaanwijzing (20 pagina's), Schematisch diagram (13 pagina's)
Pagina afdrukken
How discs with MP3 differ from CDs
ALBUM (
or
)
Album skip play
During play or stop
On the remote control
Press [ALBUM (
On the main unit
AK520 only
Push the joystick up/down ([ALBUM
[ALBUM
/ CHARA]) to select the desired album.
When selecting in the stop mode:
Current album
Press [:/J, CD] to start play.
Play starts from the first track of the selected album.
To play from another track, refer to "Track skip play" below.
Track skip play
During play or stop
On the remote control
Press [ g, REW/3] or [f, 4/FF] to select the
desired track.
On the main unit
Push the joystick left/right ([ g, CURSOR]
CURSOR]) to select the desired track (
Press [g/REW/3] or [f/FF/4] to select the desired
track.
When selecting in the stop mode:
Current album
Press [:/J, CD] to start play.
12
Play starts from the selected track.
To play from another album, refer to "Album skip play" above.
RQT7336
or
)] to select the desired album.
/CHARA)] or
Number of tracks
in current album
AK520 only
OR
Current track
Note
During 1-ALBUM mode, track skipping can only be done within the
current album.
INTRO function (Album scan)
You can find an album by listening to the first track of all albums in the
current disc for 10 seconds each.
Remote control only
Preparation: Press [:/J, CD] and then [L, CLEAR].
1
Press [INTRO].
INTRO function starts.
(INTRO function is cancelled after playing the first track in the
last album on the current disc.)
2
While your desired album is playing, press [: : : : : / J, CD].
Play continues from the first track of the album.
To stop during the process, press [INTRO] or [L, CLEAR].
Program play for MP3
You can program up to 24 tracks.
Remote control only
Preparation:
1. Press [DISC] and (within 10 seconds) [1]–[5] to select the disc.
2. Press [L, CLEAR].
1
Press [PROGRAM].
"PGM" appears.
2
Press [ALBUM (
To select an album directly, press the numbered buttons
after pressing [ALBUM (
To select album 10 or over, press [X10] once then the two digits.
To select album 100 or over, press [X10] twice then the three
digits.
3
Press [
To select a track directly, press the numbered buttons after
pressing [ g, REW/3] or [f, 4/FF].
To select track 10 or over, press [X10] once then the two digits.
To select track 100 or over, press [X10] twice then the three digits.
4
Press [ENTER].
Repeat steps 2~4 to program other tracks.
5
Press [:/J, CD] to start play.
To exit program mode
Press [PROGRAM] in the stop mode. (You can replay your program
by pressing [PROGRAM] then [:/J, CD].)
You can do the following while "P" is displayed
AK520
•
To check program contents
Press [g, REW/3] or [f, 4/FF].
Every time you press the button:
AK520
AK320 : Program order is displayed, then album number and
or [f,
•
).
To add to the program
Do steps 2~4.
•
To clear the last track
Press [DEL].
•
To clear all tracks
Press [L, CLEAR].
While "CLEAR ALL" is blinking, press the button again to clear all tracks.
Note
•
You can use repeat mode (A page 10) with program play.
•
You cannot program more than one CD for MP3.
•
You cannot program CD-DA together with MP3 tracks.
•
The program memory is cleared when you change a disc or open
the CD tray.
or
)] to select the album.
or
)].
, 4/FF] to select the track.
g
3
f
, REW/
] or [
AK320
: Album number, track number and program order are
displayed.
track number.