Dibal 500 Series Basishandleiding - Pagina 13
Blader online of download pdf Basishandleiding voor {categorie_naam} Dibal 500 Series. Dibal 500 Series 17 pagina's.
Pagina afdrukken
Changing paper in the printer
37.
1)
Open the new reel of paper and remove the part
containing glue.
2)
Open the cover. Remove the remains of the
paper and the reel holder.
3)
Use the lever on the right of the printing head to
remove pressure from the same (see drawing on
the inside of the printer cover).
4)
Insert the paper in the slot. Be careful to insert it
in the correct slot. Otherwise, the machine will
not be able to detect the paper.
5)
Turn the lever to its original position.
Hold σ down until the paper until the paper
6)
comes out on the other side of the holder. Then
slip the paper through the slot of the lid.
7)
Place the holder in the area indicated for that
purpose and close the cover.
Changing paper in the labelling machine
38.
1.1. Flat model
Scale 500 Range Model Flat can operate with continuous paper, adhesive labels or continuous adhesive
paper.
A)
To replace continuous paper (only ticket):
1)
Open the printer and releasing on the right side. Remove the spent roll.
2)
Fit the new roll as shown in the photo. Ensure that the heat-sensitive side of the paper is in
contact with the head (if not, receipts will come out blank).
3)
Press Shift
4)
Finally, Close the printer.
and print
in order to place the receipt paper properly.
7