DiBiQuadro SaturnLO Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DiBiQuadro SaturnLO. DiBiQuadro SaturnLO 19 pagina's.
Ook voor DiBiQuadro SaturnLO: Gebruikershandleiding (14 pagina's)
Pagina afdrukken
SET
SET window – RealTime
SET window – OffLine
You can open the SET window to
access the configuration settings for
Preamp,
Pwr/Cab,
meters, ReSampler, PreRender.
RESET. It restores the default values for
all configurations in the SET window.
Preamp. Enables/disables the preamp
section.
PwrCab. Enables/disables the Pwr/Cab
section.
PostEqualizer.
PostEquilizer section.
LEDs. It activates / deactivates the
meter LEDs.
RealTime and OffLine tabs. These tabs
allow the user to specify different
configurations for the ReSampler, which
are taken into account depending on
the current processing mode.
RealTime tab. This mode is applied by
your sequencer when you are using a
plugin for monitoring, or when you are
playbacking tracks. We suggest to
keep the UpSamplingFactor at 1x in
case of monitoring, 4x in case of
playback @ 44100/48000Hz, 2x in case
of playback @ 88200/96000Hz.
OffLine tab. This mode is set by your
sequencer when you are bouncing a
track or the complete mix. If the
elaboration time is not a constraint for
you and you need to render hi-gain
guitars with the Overdrive Channel, we
suggest to set the UpSamplingFactor to
at least 128x @ 44100/48000Hz, 64x @
88200/96000Hz in order to minimize the
PostEqualizer,
aliasing artifacts and get super high-
quality distortion. Try also to set a very
high PreRenderFactor (32x) to stabilize
the model in advance. For very long
renders, we strongly suggest to use
10
Enables/disables
the