EasyPro LED6WP Gebruiksaanwijzing, veiligheid, garantie - Pagina 2
Blader online of download pdf Gebruiksaanwijzing, veiligheid, garantie voor {categorie_naam} EasyPro LED6WP. EasyPro LED6WP 2 pagina's. Underwater led light
Pagina afdrukken
6 All electrical work must be performed by a qualified technician. Always follow the
National Electrical Code (NEC) or the Canadian Electrical Code as well as all local,
state and provincial codes. Code questions should be directed to your local electri-
cal inspector. Failure to follow electrical codes and OSHA safety standards may result
in personal injury or equipment damage. Failure to follow manufacturer's installation
instructions may result in electrical shock, fire hazard, personal injury or death, dam-
aged equipment, provide unsatisfactory performance and may void manufacturer's
warranty.
Installation for LED Light:
1 Before installing the product make sure to check in the box for damaged or missing
parts. Contact EasyPro or place of purchase immediately if pieces are missing or dam-
aged.
2 Disconnect power before installing the lights.
3 Connect the light fixture to its base by unthreading the nut at the base of the light.
Slide the "C" shaped bracket onto the back of the light and tighten nut. Some applica-
tions may not require base.
3 Place the light in the desired location of your water feature or landscape.
4 Adjust the angle of the light by the bolt on the base.
5 Ballast the base with rock or other suitable item to keep light fixture in place.
6 Run the cable back to the transformer. Connect leads to transformer.
7 LED6WP uses 6 watts, size transformer appropriately.
8 Install transformer on a timer and enjoy.
Limited Warranty:
The LED6WS has a limited warranty against any mechanical or material defects for a period of three years
from the date of purchase on the housing and two years on the LED bulb. LED6WP fixtures must be installed
on a magnetic 12v AC low voltage system. Limited warranty only covers properly installed and maintained
units.
The limited warranty does not cover normal wear and tear, nor any deterioration suffered through overload-
ing, improper use, negligence or accident. Similarly, any modification made by the purchaser to the product
will cause the warranty to be null and void. All returned items will be inspected to determine cause of failure
before warranty is approved. Limited warranty does not cover any cost associated with the installation or
removal of the product subject to warranty claim. An RA number must be obtained by calling EasyPro Pond
Products at 800-448-3873.
It is your responsibility to pay the return shipping charges. Be sure to include the RA number, original receipt
(in the form of an invoice or sales receipt), name, return address and phone number inside of the package.
No warranty claims will be honored without the original receipt. Ensure the product is properly packaged and
insured for the replacement value. Damage due to improper packaging is the responsibility of the sender.
The manufacturer or supplier shall not be held liable for any damages caused by defective components or
materials of this product; or for loss incurred because of the interruption of service; or any consequential/
incidental damages and expenses arising from the production, sale, use or misuse of this product. The
manufacturer or supplier shall not be held liable for any loss of fish, plants or any other livestock as a result
of any failure or defect of this product.
www.EasyProPondProducts.com • [email protected]
800-448-3873 • Grant, Michigan
2-12