HTC Vive Pre Gebruikershandleiding - Pagina 19
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HTC Vive Pre. HTC Vive Pre 28 pagina's.
Ook voor HTC Vive Pre: Handmatig (23 pagina's)
Pagina afdrukken
19
Unboxing
4.
Attach the power cables to the base stations, and then plug them each into a power outlet
to turn them on.The status lights should show as white.
5.
Connect the base stations and set the channels.
Without the
sync cable
With the sync
cable (for added
reliability)
Once turned on, do not move the base stations to another location. Doing so will disrupt the
tracking process. When you've already defined your play area, you will need to set up the
play area again if you move or adjust the angles of the base stations.
Base station status light
The status light shows:
§ White when the base station is active
§ Blinking white when the base station is on standby
§ Purple when the base stations are trying to sync
§ Blinking purple when syncing is blocked. When connecting the base stations wirelessly,
you may need to use the sync cable. For details, see
page 27.
Press the Channel buttons at the back of the base stations so that
one base station is set to channel "b", while the other is set to
channel "c".
Using the sync cable is optional. To find out if you need to use it, see
Do I need to use the sync cable?
Press the Channel buttons at the back of the base stations so that
one base station is set to channel "A", while the other is set to
channel "b".
on page 27.
Do I need to use the sync cable?
on