HTC 800 Classic Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} HTC 800 Classic. HTC 800 Classic 36 pagina's.

HTC 800 Classic

Introduction

1.1

HTC 800 Classic is a grinder that can be used to grind, strip, clean and polish concrete,

natural stone and terrazzo floors. The machine's area of application depends on the

choice of tool.

Read the manual carefully, so you are totally familiar with the machine before you start

to use it. Contact your local retailer for further information. For contact information, see

Contact Information at the start of the manual.

1.2

Even though every effort has been made to make this manual as complete and accurate

as possible, we bear no responsibility for incorrect or missing information. HTC

reserves the right to change descriptions in this manual without giving prior notice.

This manual is protected by the Copyright Act and no part of it may be copied or used

in any other way without the written approval of HTC.

1.3

In addition to the general functions, this manual deals with the areas of application and

the maintenance of the grinder.

1.3.1

Safety instructions – Explanation of symbols

A number of symbols are used in the manual to highlight the most important sections,

see below. In order to avoid both personal injury and material damage as far as possible,

it is extremely important to read and understand the text next to these symbols

particularly carefully. There are other symbols indicating practical tips. These are to

help you use the machine in the easiest and most effective way.

The following symbols are used in the document to indicate where special attention is

needed.

Warning!

This symbol means Warning! and indicates that incorrect use can result in

material damage to the machine or accessories. If you see this symbol next to a

section of text, you must be particularly careful when reading through the text

and not carry out any stages of which you are unsure. This is to protect you and

other users and to avoid damaging the machine or other equipment.

1.0

Introduction