Bionaire BH1519 Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Bionaire BH1519. Bionaire BH1519 2 pagina's.

Pagina afdrukken

P L e A S e R e A d A N d S AV e T H e S e

I M P O RTA N T S A F e T Y I N S T R U C T I O N S

When using electrical appliances, basic safety precautions

electric shock or fire, or damage the heater.

should always be followed to reduce the risk of fire,

11. To prevent a possible fire, do not block air intakes or

electric shock, and injury to persons, including the

exhaust in any manner. Do not use on soft surfaces,

following:

like a bed, where openings may become blocked.

12. A heater has hot and arcing or sparking parts inside.

1. Read all instructions before using this heater.

Do not use it in areas where gasoline, paint, or

2. This heater is hot when in use. To avoid burns, do not

flammable liquids are used or stored.

let bare skin touch hot surfaces. If provided, use

13. Use this heater only as described in this manual. Any

handles when moving this heater. Keep combustible

other use not recommended by the manufacturer

materials, such as furniture, pillows, bedding, papers,

may cause fire, electric shock, or injury to persons.

clothes, and curtains at least 3 feet (0.9 m) from the

14. Always plug heaters directly into a wall outlet/

front of the heater and keep them away from the

receptacle. Never use with an extension cord or

sides and rear.

relocatable power tap (outlet/power strip).

3. Extreme caution is necessary when any heater is

used by or near children or invalids and whenever

15. When unplugging, be sure to pull by the plug and

the heater is left operating and unattended.

not the cord.

4. Always unplug heater when not in use.

16. If the heater will not operate, see specific instructions

on Auto Safety Shut-off.

5. Do not operate any heater with a damaged cord or

17. DO NOT attempt to repair or adjust any electrical or

plug or after the heater malfunctions, has been

mechanical functions on this unit. Doing so will void

dropped or damaged in any manner. Discard heater,

your warranty. The inside of the unit contains no user

or return to authorized service facility for

serviceable parts. All servicing should be performed

examination and/or repair.

by qualified personnel only.

6. Do not use outdoors.

18. Discontinue use if plug or outlet is hot. It is

7. This heater is not intended for use in bathrooms,

recommended that the outlet be replaced if plug or

laundry areas and similar indoor locations. Never

outlet is hot to touch.

locate heater where it may fall into a bathtub or

19. The heater must not be located immediately below a

other water container.

socket-outlet. Do not use this heater in the

8. Do not run cord under carpeting. Do not cover cord

immediate surroundings of a bath, a shower or a

with throw rugs, runners, or similar coverings. Do not

swimming pool.

route cord under furniture or appliances. Arrange

cord away from traffic area and where it will not be

tripped over.

9. To disconnect heater, turn controls to off, then

remove plug from outlet.

10. Do not insert or allow foreign objects to enter any

ventilation or exhaust opening as this may cause an

THIS APPLIANCe HAS A POLARIzed PLUG (one blade is

wider than the other). To reduce the risk of electric shock,

this plug is intended to fit in a polarized outlet only one

way. If the plug does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician to

install the proper outlet.

dO NOT ATTeMPT TO MOdIFY THIS PLUG OR deFeAT THIS

SAFeTY FeATURe IN ANY WAY.

BH1519_12EM1.idml 2

deSCRIPTIONS

Figure 1

1. Left End Cap

2. Rear Housing

3. Right End Cap

TeCHNICAL SPeCIFICATIONS

• Wattage: 1500W/ (+ 5% - 15%)

• Working Voltage: 120V AC/60 HZ

PRe-OPeRATING INSTRUCTIONS

1. Carefully remove your heater from the box.

2. Check package for additional parts if unit is

SAVe THeSe

not shipped already assembled.

INSTRUCTIONS

3. Make sure the Mode/Adjustment knob is in the OFF

(O) position before plugging the heater into the outlet.

4. Place the heater on a firm, level surface.

5. Avoid overloading your circuit by not using other high

wattage appliances in the same outlet. At 1500 Watts,

this unit draws 12.5 Amps.

TURNING THe UNIT ON/OFF ANd

SeTTING THe THeRMOSTAT

1. Plug unit into wall socket.

2. Turn the Mode Adjustment knob clockwise from the (0)

position to either 1 (Low setting) or 2 (High setting) to

F e AT U R e S - O P e R AT I O N S

(See FIG.1 & 2)

Figure 2

4. Control Panel

1. Power Light

5. Grill

2 Mode/Adjustment Knob

6. Base

3. Thermostat Adjustment Knob

get a constant heat output.

3. To find the ideal thermostat setting, turn the Thermostat

Adjustment Knob clockwise to the highest setting.

4. When the desired temperature is reached slowly turn

the Thermostat Knob counter-clockwise until the heater

turns off.

5. The heater will now automatically maintain the

temperature at the required level.

6. To turn the unit off turn the Mode Adjustment Knob

counter-clockwise to the (0) position.

FROST PROTeCT™

The heater will cycle ON and OFF as it maintains the

temperature between 40–48°F. Keep unit in 1 (low setting)

or 2 (high setting) rotate Thermostat Adjustment Knob

counter-clockwise to the lowest position. Unit will stop

working. This special setting is automatically activated. In this

mode, the heater is off until the room's temperature reaches

freezing and the heater automatically turns on HI power.

F e AT U R e S - O P e R AT I O N S

WALL MOUNTING ASSeMbLY

(See FIG. 3–6)

IMPORTANT: Before drilling into any wall ensure no

electrical cables are present in the area.

NOTe: Due to the multitude of potential mounting

surfaces, mounting screws are not included with this

product. Please seek professional assistance or visit your

local hardware store to determine which type of screw is

best for your particular wall.

1. Remove Base (6) from the bottom of the

Base Mount (7). Refer to Figure 3.

2. Remove Base Mount from the bottom of the Grill (5)

by removing the two securing screws.

Refer to Figure 4.

3. Secure the Wall Mounting Bracket (8) to the wall.

Refer to Figure 5.

4. Hang the main body on the Mounting Bracket.

Refer to Figure 6.

Figure 3

Figure 5

5. Grill

6. Base

7. Base Mount

AUTO SAFeTY SHUT-OFF

This heater is equipped with a patented, technologically-

advanced, safety system that automatically shuts off

the current to the heater when a potential overheat

temperature is reached. The heater can only resume

operation when you reset it.

To Reset the Heater

If the unit shuts down:

1. Turn Switch to OFF (O) and Thermostat

to the highest setting.

2. Unplug the heater and wait 30 minutes.

3. Plug in and turn on.

Tip-Over Shut-Off

If the heater is knocked over, it will instantly shut off.

To reset, simply place the heater in an upright position

and turn ON the heater.

Figure 4

Figure 6

8. Wall Mounting Bracket

3/24/12 1:58 AM