Dickey-John CSS 110 Handmatig - Pagina 3
Blader online of download pdf Handmatig voor {categorie_naam} Dickey-John CSS 110. Dickey-John CSS 110 13 pagina's. Automatic sprayer controller
Pagina afdrukken
OPERATOR'S MANUAL
CSS 110 Automatic Sprayer Controller
11001-1679-201606
CSS 110 OVERVIEW
The CSS 110 is an automatic sprayer controller system with options for
pressure and flow-based sprayers that automatically adjusts the application
rate by regulating the liquid flow proportional to the forward speed of the
machine (DPAE). Additionally, the CSS 110 is a direct replacement for the
CCS/CMS100.
This allows for a constant product application rate even as ground speed
fluctuates. The applied rate can easily be increased or decreased by
pressing on the (+) key or (-) key, respectively.
Easy-to-read interface displays:
•
Application flow rate or pressure (Liters/square meters or bar)
•
Volume of liquid dispersed (liters)
•
Area applied (hectare 1 ha - 10000 m2)
•
Ground Speed (km/h)
Figure 1
CSS 110 Automatic Sprayer Controller System
SPECIFICATIONS
•
Power supply (operation): 9 - 15 VDC
•
Electronic operating temperature: -10 to 40 degrees C (14 to 104
degrees F)
•
Display operating temperature: 0 to 40 degrees C (32 to 104 degrees
F)
•
Storage temperature: -10 to 60 degrees C (14 to 140 degrees F)
•
IP Protection: IP40/DIN EN 60529
•
Pressure input: 0 to 5 VDC (Rin 15 KOhm)
•
Flow meter input: 12 VDC - 0 to 800 Hz (Rin 10 KOhm)
•
On/Off/Input: Open/to ground
•
Flush input to ground
•
APER (Application Error-Servo Valve Full Open) Input to GND (pull up
resistor 33 KOhm)
•
Speed Input: 12 VDC - 0 to 1000 Hz (Rin 10 KOhm)
•
+12V AUX output 12 VDC 1A operation (3A short time, protected)
CSS 110 OVERVIEW / 1