Axis S2024 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Axis S2024. Axis S2024 14 pagina's. Camera station s20 appliance series
Ook voor Axis S2024: Installatiehandleiding (17 pagina's), Gebruikershandleiding (18 pagina's)

Pagina afdrukken

AXIS Camera Station S20 Appliance Series

Network

The features of this pane are:

Status Enable/Disable - When the DHCP server is set to disable you must assign IP addresses manually to the cameras or use an

external DHCP server accessible via the U1 network connection for IP assignment.

Start/End IP Addresses - When DHCP is enabled, you can choose a Start and End IP address range for assignment of attached devices.

Subnet Mask - The subnet mask of the U1 switch connection.

Gateway - The gateway that could be used to access the U1 switch connection.

DNS 1 - The primary domain name server used by the switch.

DNS 2 - An alternate domain name server used by the switch.

Lease Length - The suggested length of time in minutes that the DHCP server will use for potentially reassigning its pool of

dynamic IP addresses. A minimum of 60 minutes is enforced.

Reset - Clears all the entries allowing you to start again.

Save - Saves the changes made in any of the network settings. For these changes to take effect, you must reboot the switch.