Epever LS1024E Gebruikershandleiding - Pagina 13
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epever LS1024E. Epever LS1024E 20 pagina's. Solar charge controller
Ook voor Epever LS1024E: Handmatig (2 pagina's)
Pagina afdrukken
· High Voltage Transients
PV is protected from high voltage transients. In lightning prone areas,
additional external suppression is recommended.
5.2 Troubleshooting
Trouble Shooting
Faults
Charging LED
indicator off
during daytime
when sunshine
falls on PV
modules
properly.
Charging LED
indicator
flashing
Battery LED1
indicator
SLOWLY
FLASHING
Possible
reasons
PV
array
disconnection
Battery voltage
fast
higher
over
disconnect
voltage(OVD)
Battery
under
voltage
Check if PV and battery wire
connections are correct and
tight.
Check if battery voltage is
than
over high. Disconnect the
voltage
solar module.
When load output is normal,
LED status will return to ON
automatically when fully
charged.
9
Troubleshooting
Table 5-1