Alpha Networks CS-3152 Snelle installatiehandleiding - Pagina 11

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Alpha Networks CS-3152. Alpha Networks CS-3152 11 pagina's. Wireless hd day/night cloud camera

Pagina afdrukken

Using the IP camera

Video Display Control

Recording, Snapshot and Audio Controls

NOTE: Please read the User Manual for detailed information

about other camera functions, applications and features.

Quick Installation Guide

Change display settings Click on the little screen icon

to quickly switch among the preconfigured formats of

the video, which correspond to the video settings profile.

Four profiles can be configured using the Video and

Audio Settings menu. See the description of the menu

below in the section of the same title. The yellow icon

shows the profile which is currently being used. Please

note browsers other than Internet Explorer show only M-

JPEG profiles.

Full Screen Click on the Full Screen icon to use the

entire monitor display area for live video.

Record and capture Use the camera icon to take a

snapshot of the video display. This will immediately

cause the screen capture or snapshot to appear on the

desktop in a new browser window. Use the Record (REC)

icon to begin recording to the local hard disk. In order to

do either of these however, first click on the file folder

icon to select the location where the snapshot or video

recording is to be stored (by default a folder is created in

My Documents if not specified). The REC icon becomes

yellow while recording is active.

Audio input control Click to enable or disable the

camera's built-in mic to provide audio surveillance or

voice communication from the camera. This icon

becomes yellow while audio input is active.

Audio output control Audio speakers can be

connected to the camera via the external audio mini-

plug. Use this control to enable or disable the audio

output for voice or other audio through connected

speakers. This icon becomes yellow while audio output is

active. This is disabled by default.