Alpha Professional Tools AIR-680 Gebruiksaanwijzing - Pagina 13

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Alpha Professional Tools AIR-680. Alpha Professional Tools AIR-680 20 pagina's. Pneumatic polisher
Ook voor Alpha Professional Tools AIR-680: Gebruiksaanwijzing (20 pagina's)

Pagina afdrukken

sIleNCeR / muffleR

To comply with OSHA Occupational Noise Exposure Standard

Number 1926.52, this polisher is equipped with an internal Silencer

System. When the polisher is operated correctly at 85 PSI, the sound

level emitted should be less than 80 dBA. The internal Silencer

System is also used to maintain a constant back pressure inside the

tool, to prevent the rotor assembly from exceeding the max speed

of the bearings; this helps prevent the polisher from exceeding the

recommended 4,000 RPM. The exhaust hose for this tool also helps

to reduce the noise level by venting the exhaust air and residual

air-line, thus eliminating the risk of excess rust inhibitor oil dripping

on the work piece.

Tools sent in for repair, where the body gasket or silencer is removed

or modified, are not covered under our Limited Warranty.

ReVeRsIble sIde hANdle

Attach the handle into the threaded socket on either the left or right

side of the tool. A locknut is slipped onto the threads to keep the

handle safely in position.

maintenance and usage Tip:

Do not apply more force or pressure than the force created by the

weight of the polisher itself. The polishing discs are designed to work

properly under light downward hand pressure. Applying excessive

force or pressure may damage the vanes and could shorten the life

of the tool.

AIR suPPly hose Assembly

This new hose has 1/4" NPT threads and is composed of a special

material to avoid kinks and remain flexible down to -40°F.Replace-

ments are available should the hose become damaged (Part No.

1030-0002).

WATeR suPPly hose Assembly

This new hose may be connected to any garden hose. It is composed

of a special material to avoid kinks and remain flexible down to -40°F.

Replacements are available should the hose become damaged (Part

No. 1030-0003).