Epever WiFi 2.4G DB9 B Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Epever WiFi 2.4G DB9 B. Epever WiFi 2.4G DB9 B 2 pagina's. Wifi 2.4g adapter
Ook voor Epever WiFi 2.4G DB9 B: Snelstarthandleiding (2 pagina's)
Pagina afdrukken
HUIZHOU EPEVER TECHNOLOGY CO., LTD
※ Thanks for selecting the WiFi transmission terminal; please
read this manual carefully before using the product.
※ Please keep this manual for future reference.
WiFi 2.4G Adapter
1. Overview
Through a local WiFi 2.4G network, the WiFi 2.4G adapter can transmit
all operational data from the EPEVER solar controller, inverter, or
inverter/charger to the EPEVER cloud server in real-time. Users can
remotely monitor the connected devices and program parameters via the
EPEVER server, mobile APP, or the large screen.
Features:
Applicable to EPEVER controllers, inverters, or inverter/charger with
RJ45, DB9 interfaces
Use immediately after connecting; easy and convenient operation
Directly powered by the communication port
Up to 30 meters of communication distance
Support the "Local" and "EPEVER Cloud" working mode.
One key to restoring the factory settings
2. Appearance
2.1 EPEVER WiFi 2.4G RJ45 A
Interface instruction
No.
Name
Connect to the solar controller, inverter, or
❶
RJ45 port
inverter/charger
One key to restoring factory settings
Note: Long press the Reload button with a
❷
sharp object when the terminal's power is on.
Reload button
The Link indicator flashes twice quickly, and
the factory settings are restored.
❸
Link indicator
Indicate the communication status
❹
Power indicator
Indicate the power status
Indicator instruction
Indicator
Status
ON solid in green
Link
OFF
indicator
Fast flashing in green
Power
ON solid in green
indicator
OFF
2.2 EPEVER WiFi 2.4G DB9 B
Interface instruction
No.
Name
DB9 male
Connect to the solar controller, inverter, or
❶
connector
inverter/charger
❷
Antenna
Enhance the signal transmission
EPEVER WiFi 2.4G RJ45 A
EPEVER WiFi 2.4G DB9 B
Instruction
Instruction
Connect to the WiFi
Not connect to the WiFi
Reset to the factory mode
Normal powered on
Not powered on
Instruction
1
TEL: +86-752-3889706
One key to restoring factory settings
Note: Long press the Reset button through
the KEY hole with a sharp object when the
❸
Reset button
terminal's power is on. The indicator light
flashes twice quickly, and the factory
settings are restored.
Indicate
Network
❹
(Observe the indicator status through the
Indicator
KEY hole)
❺
Power Indicator
Indicate the power status
Connect the EPEVER WiFi 2.4G DB9 B to the solar controller, inverter,
or inverter/charger by a DB-9 female connector. The wire sequence and
name of the DB9 female connector are shown below.
No.
Name
Instruction
1
NC
Floating
2
NC
Floating
Power2
3
VCC2
(12V/200mA)
4
GND2
Power GND2
5
GND1
Power GND1
Indicator instruction
Indicator
Status
ON solid in green
OFF
Network Indicator
Fast flashing in
green
ON solid in green
Power Indicator
OFF
3. Specifications
Model
EPEVER WiFi 2.4G
Parameters
Input voltage
Power consumption
Peak emission: 5V@100mA; Idle: 5V@40mA
Enclosure
Communication method
Com. parameters
Working Frequency
Antenna gain
Environment temp.
Com. standard
EPEVER general communication standardV1-1.0
Com. protocol
EPEVER IoT communication protocol V1.1
Com. port
Dimension
66.24* 51.28* 23.76mm
Net weight
4. Disclaimers
The warranty does not apply to the following conditions:
Damage caused by improper use or inappropriate environment.
The parameter setting exceeds the WiFi terminal's limit.
Damage caused by working temperature exceeds the rated range.
Unauthorized dismantles or attempted repairs.
Damage caused by force majeure.
Damage occurred during transportation or handling.
Website: www.epever.com
the
communication
status
No.
Name
Instruction
6
NC
Floating
7
RS485-A
RS485-A
8
RS485-B
RS485-B
Power1
9
VCC1
(5V/400mA)
Instruction
Connect to the WiFi
Not connect to the WiFi
Reset to the factory mode
Normal powered on
Not powered on
EPEVER WiFi 2.4G
RJ45 A
DB9 B
5VDC
IP54
RS485
9600 ~ 115200bps, 8N1
2.4~2.4835GHz
2.5dBi~ 5dBi
-40℃~ 85℃
RJ45
DB9
101.2* 64* 26mm
38.5g
39.5g
2