EPH Controls R27-RF Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} EPH Controls R27-RF. EPH Controls R27-RF 2 pagina's. 2 zone rf programmer

Pagina afdrukken

R27-RF - 2 Zone RF Programmer

9. Advance function

This function allows the user to bring forward the next switching time.

If the zone is currently timed to be OFF and the ADV is pressed, the zone

will be switched ON until the end of the next switching time.

If the zone is currently timed to be ON and the ADV is pressed, the zone

will be switched OFF until the end of the next switching time.

ZONE

Press

for Zone 1 and

ADV.

To cancel the ADVANCE function, simply press the respective ADV

button again.

10. Holiday mode

Lower the cover on the front of the unit.

Move the selector switch to the RUN position.

Press the

button.

Holiday

The current date and time will ash on the screen. It is now

possible to enter the date and the time when you plan to return.

Press the

buttons to select the day.

Press the

buttons to select the month.

Press the

buttons to select the year.

Press the

buttons to select the hour.

To activate Holiday mode press the

To cancel Holiday mode press the

Otherwise Holiday mode will deactivate on the time and date entered.

11. Connect the RF thermostat with the programmer

On the programmer

Lower the front cover and move the selector switch to

the RUN position. Press the

Wireless Connect will appear on the screen.

On the RFR wireless room thermostat or RFC wireless cylinder thermostat

Press the Code button. This is located inside the housing on the PCB.

On the programmer

Zone 1 will begin to ash. Press the

zone you wish to connect the thermostat to.

The wireless symbol

appears on the screen.

The thermostat will count upwards to the number of the zone that it is paired

with. When it reaches the number of the zone that it is paired with press the

handwheel on the thermostat.

The programmer is now operating in the wireless mode. The temperature of

the wireless thermostat is now displayed on the programmer.

Repeat this process for the second zone if required.

12. Disconnect the RF thermostat from the programmer

On the programmer

Lower the front cover and move the selector switch to

the RUN position.

Press the

button for 5 seconds.

Wireless Connect will appear on the screen.

Press the

button for 3 seconds. This will clear all RF connections

thereby disconnecting all thermostats from the timeswitch.

Press the

button.

ZONE

for Zone 2.

ADV.

RUN

CLOCK

SET

Press

Holiday

Press

Holiday

Press

Holiday

Press

Holiday

button.

button again.

CLOCK

SET

button for 5 seconds.

CLOCK

SET

EPH Controls Ireland

Sitecast Industrial Estate, Pouladu ,

Cork, T12 W665, Ireland

[email protected] www.ephcontrols.com

13. Backlight mode selection

There are two settings for selection. The factory default setting is ON.

The backlight is permanently ON.

AUTO

On pressing any button the backlight stays on for 10 seconds.

To adjust the backlight setting

Lower the cover on the front of the unit.

Move the selector switch to the RUN position.

Press the

Press either the

Press the

14. Keypad lock and unlock

PROG

To lock the keypad, press and hold the

SET

will appear on the screen. The keypad is now locked.

To unlock the keypad, press and hold the

seconds.

15. Copy function

Copy function may only be used if the programmer is in the 7d mode.

Lower the cover on the front of the programmer.

Move the selector switch to the PROG SET position.

First, program one of the days of the week with a schedule you wish to copy

to other days.

While still on that day press and hold the

This will take you into the Copy screen.

The day of the week that is to be copied is shown and the day it is to be

copied to is ashing.

RUN

Press the

PROG

Press the

SET

Continue in this fashion by pressing the

the day ashing and by pressing the

When you are nished press the

to the standard schedule programming screen.

16. Frost protection function

button for the

Selectable range 5~20°C. This function is set to protect pipes against

freezing or to prevent low room temperature when the programmer is

programmed to be OFF or is manually OFF.

Frost protection can be activated by following the procedure below.

Move the selector switch to the RUN position.

Press both the

Press either the

protection. Press

Press either the

frost protection setpoint. Press

All zones will be switched ON in the event of room temperature falling

RUN

below the frost protection setpoint.

PROG

SET

17. Master reset

Lower the cover on the front of the programmer. There are four hinges

holding the cover in place. Between the 3rd and 4th hinges there is a

circular hole. Insert a ball point pen or similar object to master reset the

programmer.

After pressing the master reset button, the date and time will now need

to be reprogrammed.

EPH Controls UK

Unit E4, Welland Business Park, Valley Way, Market Harborough,

Leicestershire, LE16 7PS, United Kingdom

[email protected] www.ephcontrols.co.uk

Page 2 of 2

Operating Instructions

button for 5 seconds.

buttons to select the ON or AUTO mode.

button.

and

will disappear from the screen. The keypad is now unlocked.

COPY

Holiday

button to copy the schedule to this day.

button to skip this day

button to copy the schedule to

button to skip that day.

button and the programmer will return

and

buttons for 5 seconds, to enter selection mode.

buttons to to turn On or turn O frost

button to con rm.

buttons to increase or decrease the desired

to select.

RUN

CLOCK

PROG

SET

Unlocked

buttons for 5 seconds.

Holiday

buttons for 5

Holiday

RUN

CLOCK

PROG

SET

button for 3 seconds.

RUN

CLOCK

PROG

SET