DieHard 28.71225 Gebruikershandleiding - Pagina 17
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DieHard 28.71225. DieHard 28.71225 20 pagina's. 12v battery charger & engine starter
Pagina afdrukken
14.
MOvINg AND STORAgE INSTRUcTIONS
14.1
Store the charger unplugged, in an upright position. The cord will still conduct
electricity until it is unplugged from the outlet.
14.2
Store inside, in a cool, dry place (unless you're using an on-board
Marine Charger).
14.3
Do not store the clips on the handle, clipped together, on or around metal, or
clipped to cables.
14.4
If the charger is moved around the shop or transported to another location,
take care to avoid/prevent damage to the cords, clips and charger. Failure to
do so could result in personal injury or property damage.
15.
TROUBLEShOOTINg AND fAILURE cODES
fAILURE
cODE
Battery failed to get over 10V
F01
within 2 hours
Battery could not be
F02
desulfated
Battery failed to charge
F03
completely
If you get a failure code, you have to check the connections and settings and/
or replace the battery.
PROBLEM
No reading on the digital
display.
Digital Display reads LO
when testing the alternator.
Digital Display reads HI
when testing the alternator.
Battery clips do not spark
when touched together.
DEScRIPTION
POSSIBLE cAUSE
Charger is not plugged in.
No power at the receptacle.
The alternator output is 13.2
volts or less.
The alternator output is 14.6
volts or more.
The charger is equipped
with an auto-start feature. It
will not supply current to the
battery clips until a battery
is properly connected.
Meaning, the clips will not
spark if touched together.
Could be caused by either a bad battery or
trying to charge a 6V battery
The desulfation process could not be
completed - battery is bad
Could be caused by a bad battery or
trying to charge a large battery or bank of
batteries on too low of a current setting
Plug the charger into an AC
outlet.
Check for open fuse or
circuit breaker supplying AC
outlet.
Have the electrical system
checked by a qualified
technician.
Have the electrical system
checked by a qualified
technician.
No problem, this is a normal
condition.
14
•
•
cAUSE
REASON/SOLUTION