Axis M1065-LW Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Axis M1065-LW. Axis M1065-LW 16 pagina's.

AXIS M1065-LW Network Camera

Setup

4. Click Ok.

Applications

About applications

AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications

for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications

To find the user manuals for Axis applications, go to axis.com

Note

• Several applications can run at the same time but some applications might not be compatible with each other. Certain

combinations of applications might require too much processing power or memory resources when run in parallel. Verify

that the applications work together before deployment.

The most common security method is WPA-/WPA2-PSK. This product also supports WPA

secure method. All settings must match the settings in the access point.

WPA

-/WPA2

The security method WPA-/WPA2–PSK is designed for small networks and does not require an authentication server. The Axis

product uses a PSK (Pre-Shared Key) to authenticate with the access point. The key can be entered either as manual hex — a 64

hexdecimal number (0–9, A-F) — or a passphrase using 8–63 ASCII characters. The longer the passphrase, the more secure is the key.

WPA

-/WPA2-Enterprise

The security method WPA-/WPA2-Enterprise is designed for large networks and requires an authentication server. The network is

protected by EAPOL (Extensible Authentication Protocol Over Lan).

Select the WPA-Enterprise type being used by the access point:

•

EAP-TLS. See page 9 .

•

EAP-PEAP/MSCHAPv2. See page 10.

About EAP-TLS

The authentication protocol EAP-TLS (Extensible Authentication Protocol - Transport Layer Security) allows the client and server to

authenticate each other using digital certificates provided by a Certification Authority. To gain access to the protected network, the

Axis product presents its certificate to the network access point. Access is granted if the certificate is approved.

Important

To ensure successful certificate validation, time synchronization should be performed on all clients and servers prior to

configuration.

How to configure the wireless settings using WPA

1. Go to Settings > System > Wireless

2. In the list, select the wireless network.

3. Under WPA-Enterprise type, select EAP-TLS.

4. Enter the user Identity associated with your certificate.

5. Select the EAPOL version (1 or 2) as used in the access point.

-PSK

-/WPA2-Enterprise and EAP-TLS

-/WPA2

-Enterprise which is a more