EPHESUS Stadium Handleiding voor installatie-instructies - Pagina 12
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} EPHESUS Stadium. EPHESUS Stadium 16 pagina's. Stadium series
Pagina afdrukkenInstallation Instructions - Stadium Series
Figure 11. Aiming
4.
Slightly loosen the fixture aiming screws just enough to allow the fixture to rotate and tilt. Push on the laser apparatus to
ensure it is tightly pressed onto the heat sinks.
5.
Turn on the laser and aim the fixture by targeting the green laser dot at the aiming point. If aiming tube is used, look
through tube and adjust fixture until aiming point is centered in view through tube. Refer to photometrics or project
installation drawings for aiming point coordinates.
After targeting the aiming point with the laser, turn off the laser to conserve battery life.
N
otee:
6.
After aiming is complete, tighten all bolts and screws including hex and set screws on side of fixture and mounting
hardware.
12
EATON
IB528002EN
Figure 10. Aiming Laser & Mount
Aiming Laser
or Tube
Set Screw
Hex Screw
Mounting Hardware
Installation instructions rev 20171011
Laser and Mount