Olympus CAMEDIA D-550 Zoom Snelstarthandleiding

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Olympus CAMEDIA D-550 Zoom. Olympus CAMEDIA D-550 Zoom 2 pagina's. Olympus camedia d-550 zoom: quick start
Ook voor Olympus CAMEDIA D-550 Zoom: Snelstarthandleiding (2 pagina's)

Pagina afdrukken

Olympus CAMEDIA D-550 Zoom Snelstarthandleiding

C-300 ZOOM

DIGITAL CAMERA

D-550 ZOOM

Quick start guide

We've included this convenient Quick start guide to show you basic functions and

techniques that will help you quickly master your new camera. For more detailed

descriptions of procedures, as well as for additional information on more sophisticated

features not covered here, please refer to the printed "Basic Manual", or the primary

"Reference Manual" on the CD-ROM.

Package contents

Camera

CD-ROM with Windows 98 USB driver

Strap

software, Reference manual, and more.

AA (R6) alkaline batteries (4 pieces)

Warranty card/Registration card (not

Video cable

provided in some areas)

USB cable

Safety Precautions (booklet)

Basic manual

SmartMedia

Quick start guide

Static-free case

Software installation guide (included in

Index labels (2 pieces)

the CD-ROM package)

Write-protect adhesive seals (4 pieces)

SmartMedia instructions

OLYMPUS AMERICA INC.

Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000

24/7 online automated help: http://support.olympusamerica.com/

Phone customer support: Tel. 1-888-553-4448 (Toll-free)

OLYMPUS OPTICAL CO. (EUROPA) GMBH.

Premises/Goods delivery: Wendenstrasse 14-18, 20097 Hamburg, Germany

Tel. 040-237730

Letters: Postfach 10 49 08, 20034 Hamburg, Germany

http://www.olympus.com/

Printed in Japan

1AG6P1P1353--

3 Shooting/Playback

Taking still pictures

1 1 1 1

Open the lens barrier fully.

Slide the lens barrier fully open until it clicks.

The flash pops up and the lens extends.

2 2 2 2

Position the AF target mark over the

subject in the viewfinder.

Orange lamp

AF target mark

Green lamp

3 3 3 3

Press the shutter button gently

(halfway).

The focus and exposure are locked when the green lamp

on the right of the viewfinder lights up. At this time the

sound of the focusing mechanism can be heard from inside

the camera, but no picture is being taken.

4 4 4 4

Press the shutter button all the way (fully).

The camera takes the picture.

Playing back still pictures

1 1 1 1

Press

with the lens barrier closed.

The monitor turns on and displays the last picture taken.

2 2 2 2

Press

3 3 3 3

Jumps to the picture 10 frames behind.

Press

to cancel playback.

Displays the

The monitor and camera

next picture.

turn off.

Displays the

previous picture.

Jumps to the picture 10 frames ahead.

1 Getting started

Attaching the strap

1 1 1 1

Thread the short end of the strap through the

strap eyelet.

2 2 2 2

Thread the long end of the strap through the

loop that has already gone through the eyelet.

3 3 3 3

Pull the strap tight, making sure that it is

securely fastened and does not come loose.

Loading the batteries

1 1 1 1

Make sure that:

The lens barrier

is closed.

The lamp on the right

of the viewfinder is off.

2 2 2 2

Slide the battery compartment lock from

3 3 3 3

Slide the battery compartment cover

in the direction of

(the direction

indicated by the

mark on the

cover), and lift it up in the direction of

4 4 4 4

Insert the batteries, making sure that they are correctly oriented as

shown in the illustration.

When using AA (R6) batteries

When using CR-V3 lithium battery packs

There is a mark

showing the correct

way to insert the AA

batteries on the

bottom of the

camera.

VT367901

Recording movies

1 1 1 1

Open the lens barrier fully.

The camera turns on in the shooting mode.

2 2 2 2

Press

The monitor turns on and the screen for selecting the shooting mode is displayed.

3 3 3 3

Press

to select MOVIE, then press

4 4 4 4

Record the movie while observing your

subject on the monitor.

Press the shutter button fully to start recording.

Press the shutter button fully again to stop

recording.

Playing back movies

1 1 1 1

Press

with the lens barrier closed.

The monitor turns on.

2 2 2 2

Press

to display the desired picture with the

then press

The top menu is displayed.

3 3 3 3

Press

to select MOVIE PLAY.

4 4 4 4

Press

to select MOVIE PLAYBACK.

The movie is played back after the orange lamp on the right of the viewfinder

blinks and the camera accesses the movie data. When the movie reaches the

end, the display returns automatically to the beginning of the movie.

5 5 5 5

Press

to display the MOVIE

PLAYBACK menu. Then select the

desired operation and press

PLAYBACK

: Plays back the entire

movie again.

FRAME BY FRAME : Plays back the movie

manually one frame at a

time.

EXIT

: Leaves the movie playback mode.

5 5 5 5

Close the battery compartment cover in the

direction of

. While pressing the

mark, slide the cover in the direction of

If the battery compartment cover seems hard to

close, do not force it. With the battery compartment

cover shut, press the

the direction shown in the illustration.

Strap

eyelet

6 6 6 6

Slide the battery compartment lock from

Inserting the card (SmartMedia)

1 1 1 1

Make sure that:

The lens barrier

is closed.

The monitor is off.

2 2 2 2

Open the card cover.

3 3 3 3

Insert the card as far as it will go in the

direction shown in the illustration.

There is an arrow inside the card cover, indicating

the direction in which the card should be inserted.

4 4 4 4

Close the card cover securely until it clicks.

Removing the card

Hold the card with your fingertips and pull it out in the

direction of the arrow.

When using lithium

battery packs, insert

them so that the

"CAMEDIA" label on

Never open the card cover, or remove the card or the batteries while the

each battery is

camera is turned on. Doing so could destroy all data on the card. Destroyed

facing the lens side

data cannot be restored.

of the camera.

4 Protecting pictures (Protect)

You are recommended to protect important pictures to avoid accidentally erasing

them.

1 1 1 1

Press

with the lens barrier closed.

The monitor turns on.

2 2 2 2

Press

to select the picture you want to protect.

3 3 3 3

Press

, then press

The mode menu is displayed.

4 4 4 4

Press

to select the PLAY tab, then press

MOVIE

5 5 5 5

Press

to select

press

SELECt

6 6 6 6

Press

to select ON, then

indicator,

press

The selected picture is protected.

To close the menu, press

• The

indicator is displayed at the top right of the protected picture.

• Protection on each picture remains even when the camera is turned off.

• Protected pictures cannot be erased by the single-frame/all-frame erase

MOVIE%PLAYBACK

function, but they can be all erased with the format function.

PLAYBACK

• Protection cannot be applied to pictures stored on a card with a write-

protect seal.

FRAME%BY%FRAME

EXIt

SELECt

2 Turning the power on/off

When shooting pictures

Power on:

Open the lens barrier fully.

The camera turns on in the shooting

mark firmly and push in

mode. The lens extends and the

flash pops up.

If the lens does not extend when the

lens barrier is opened, there is a

possibility that the cover is stuck in

the first click position.

Open the lens barrier until it clicks.

The monitor is off.

The lamp on the right

of the viewfinder is off.

When playing back pictures

Power on:

Press the

with the lens barrier closed.

The camera turns on in the playback

mode. The monitor turns on.

With the lens

barrier closed

5 Erasing pictures

Single-frame erase

1 1 1 1

Press

The monitor turns on.

2 2 2 2

Press

3 3 3 3

Press

The top menu is displayed.

4 4 4 4

Press

, then

5 5 5 5

Press

press

The picture is erased and the menu is closed.

OFF

again.

Power off:

Close the lens barrier slightly

until it just touches the lens

barrel.

Wait until the lens is fully retracted,

then close the lens barrier

completely.

The camera turns off. (The monitor

also turns off.)

Press the flash down until it locks

into place to close it.

Power on

Power off

Diopter adjustment dial

Power off:

(monitor) button

Press the

(monitor) button.

The camera turns off (the monitor

turns off).

Power on

Power off

• While looking through the viewfinder, turn the diopter adjustment dial until

the AF target mark is clearly visible.

• To save battery power, the camera automatically enters the sleep mode

after about 3 minutes of non-operation. If the monitor is on, it will

automatically turn off. The camera activates again as soon as you lightly

press the shutter button or zoom lever. Whenever possible, turn the

camera off when you do not intend to take any pictures for a while.

with the lens barrier closed.

to select the picture you want to erase.

to select

ERASE.

INFO

MODE%MENU

ERASE

to select YES, then

ERASE

YES

SELECt

• Erasure is not possible if the picture you want to erase is protected or a

write-protect seal is attached to the card. Before erasing, unprotect the

picture or remove the write-protect seal from the card.

• Once erased, pictures cannot be restored. Check each picture before

erasing to avoid accidentally erasing pictures you want to keep.