Olympus CAMEDIA X-100 Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Olympus CAMEDIA X-100. Olympus CAMEDIA X-100 2 pagina's. D-540 zoom quick start guide (portuguese)
Ook voor Olympus CAMEDIA X-100: (Portugese) Snelstarthandleiding (2 pagina's)

Olympus CAMEDIA X-100 Snelstarthandleiding
qsge_pquick.fm 2 ページ 2004年1月21日 水曜日 午後10時15分
TAKING PICTURES
There are two ways to compose your subject: using the
monitor or with the viewfinder. Depending upon the shooting
situation, there is advantages to each method. Please refer
to the printed Basic Manual for more information.
a.
Taking a Picture with the Monitor
• Slide the power switch to
, pressing and holding the
lock button.
• Decide the composition while looking at the image on the
monitor.
Icons representing camera settings appear on the
monitor, telling you important information such as the
Flash and record modes, battery life, and the number of
frames remaining.
• Press the shutter button halfway. The green lamp will light
steadily when the focus and exposure are set.
• Press the shutter button completely to take the picture.
• You can take pictures using the viewfinder, with the
monitor turned off. When the monitor is turned off, the
green lamp and
mark are not displayed.
VIEWING AND
ERASING PICTURES
With a Digital camera, you can easily view the photos you
want—and delete the ones you don't.
a.
Viewing Pictures
There are two ways to access the Playback mode:
• Slide the power switch to
.
OR
• If the power switch is located at
the QUICK VIEW button.
The last picture taken appears in the monitor. Use
to scroll though all the images saved on your xD-Picture
Card.
When you are finished reviewing your pictures:
• Slide the power switch to OFF.
OR
• If you reviewed the images by pressing the QUICK VIEW
button, press the shutter button halfway to return to the
shooting mode.

CONNECTING THE CAMERA

TO A COMPUTER

TIP
Olympus recommends using the optional AC adapter to ensure a consistent
power supply when downloading images.
Make sure that the camera is turned off before connecting
it to your computer.
Windows 98 users must install the "USB Driver for
Windows 98" software before connecting the Digital
camera to the computer. Refer to the Software Installation
Guide for complete information.
INSTALLING THE CAMERA
SOFTWARE
You've now mastered the basic functionality of your new Olympus
Digital Camera! You are now ready to begin exploring the possibilities
that digital photography brings to your computer. Activities such as
photo editing, printing, and much more are only steps away!
About the Olympus CAMEDIA Master CD-ROM
Your Olympus Digital Camera comes bundled with a suite of software and documentation.
The CD includes:
• CAMEDIA Master: To download pictures from the camera, view, organize, retouch and print
your digital photos and movies.
• USB Driver for Windows 98: This utility must be installed to allow the camera to communicate
with your computer if it uses the Microsoft Windows 98 operating system.
• Olympus Digital Camera Reference Manual: A complete reference guide in digital form,
saved on the CD in PDF format.
You are now ready to install the computer software.
• Open the CAMEDIA Master CD-ROM package and locate the Software Installation Guide in
the language you wish to use.
• Continue to follow the step-by-step instructions for installing the software, and enjoy your new
digital photo processing capabilities!
b.
Zooming
This Digital camera features a zoom lens, allowing you
to get closer to action, or capture wide-angle shots and
get everything into the picture.
• Push the zoom lever to zoom out and get everything into
the picture.
• Pull the zoom lever to choose telephoto shooting and get
closer to the action.
c.
Flash Modes
This Digital camera features multiple flash modes.
Please note that not all flash modes are available
depending on the shooting mode selected.
b.
Erasing Pictures
Once erased, pictures cannot be restored.
The beauty of digital photography is your ability to keep
the photos you want, delete the rest, and reuse empty
memory space to take new pictures. This Digital camera
offers two ways to permanently erase unwanted digital
photos:
(shooting mode), press
Single-Frame Erase: Deletes only the picture currently
displayed in the monitor.
• Slide the power switch to
display the picture you want to erase.
• Press
• Press
• Press
TIP
Olympus makes it simple to connect the Digital camera to your
computer.
• Turn the camera off.
• Plug the supplied USB cable into the USB connector on your
• Slide the power switch to
• The monitor turns on and the selection screen for the USB
• Press
Push to zoom out
Pull to zoom in
and use the arrow pad to
.
to select
ERASE.
to select YES, and then press
.
Images can also be erased while in the "QUICK VIEW"
mode described in step 5a. This makes it easy to quickly
erase a picture that you just took.
camera and computer as illustrated on the right.
.
connection is displayed.
to select PC, and then press
on the USB screen.
The camera starts communicating with the PC.
Additional Camera Features
This Digital camera offers a host of advanced features to expand your creativity. Here's just a small sampling.
See the Basic Manual for details on these capabilities, and more!
• 7 Scene Program Shooting Modes: By using the on-line mode dial (virtual dial), you can easily select
the camera settings that most closely match your shooting situation.
• Sequential Shooting: Take a rapid succession of still pictures.
• Still Picture Editing: Edit still pictures and store them as new pictures.
• Macro Mode: For close-ups as tight as 0.7 ft. (0.2m), select Macro Mode.
• Movie Recording: Yes, this Digital camera records movies! (Movies cannot be recorded with sound.)
• Close-up Playback: Enlarge the pictures in the monitor to check details of the selected image.
• Index Display: View several thumbnail pictures on the monitor at once.
• Protecting Pictures: Prevents you from accidentally erasing photos.
• Video Playback: View your pictures and movies on the monitor.
• Panorama Shooting: Connect overlapping images into a single picture using the panorama mode and
Olympus CAMEDIA Master software.
• Direct Printing: Connect directly to your PictBridge-compatible printer with the USB cable to print your
favorite images easily.
TIP
Remember to complete and return your Registration Card (not provided in some areas), and keep all camera
documentation handy.
Technical Support (USA)
1-888-553-4448 (Toll-free)
8:00 AM - 10:00 PM ET
Monday - Friday
Icon
Flash Mode
Description
No
Auto-flash
The camera automatically decides if the flash is needed.
indication
Red-eye
Reduces incidence of red-eye by emitting pre-flashes to
Reduction Flash
shrink pupil size before firing the main flash. The strobe
effect is normal operation for this mode.
Fill-in Flash
The flash always fires with every picture.
Flash Off
Turns the flash off for times when flash photography is
prohibited or not desired. The flash never fires.
With the shutter button pressed halfway, the flash is
ready to fire when the
indicator in the monitor lights.
When the
indicator is blinking, the flash is charging.
d.
Number of Storable Pictures
Your digital camera can handle xD-Picture Cards from
16 MB to 512 MB. The number of storable pictures
depends on the image quality selected.
See the Reference Manual for complete descriptions of
each recording mode and the storable frame capacity for
that of xD-Picture Card.
TIP
To find out how many frames you have left, turn on the monitor
and look for the number in the lower right corner. Remember,
you can always delete unwanted pictures to make room for
more. (See Step 5.)
All-Frame Erase: Deletes all pictures on the xD-Picture
Card in one operation, except for pictures you have
protected.
• Slide the power switch to
.
• Press
, then press
to select MODE MENU.
• Use
to select the CARD tab, then press
access the CARD SETUP screen.
ALL ERASE should be highlighted. Press
• As a safeguard, the Digital camera will ask you to select
YES or NO to confirm erasing, as this process permanently
deletes all unprotected pictures. Select YES and press
European Technical Customer Support
00800 - 67 10 83 00 (Toll-free)
+49 180 5 - 67 10 83 or +49 40 - 237 73 899
(Charged)
9:00 AM - 6:00 PM MET
Monday - Friday
© 2004 OLYMPUS CORPORATION
twice to
.
.