Olympus E-1 - Digital Camera SLR Snelstarthandleiding

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Olympus E-1 - Digital Camera SLR. Olympus E-1 - Digital Camera SLR 2 pagina's. Olympus corporation digital camera battery product manual
Ook voor Olympus E-1 - Digital Camera SLR: Instructies (2 pagina's), Instructies (2 pagina's), Specificaties (10 pagina's), Producthandleiding (2 pagina's), Zak handleiding (5 pagina's), Specificaties (3 pagina's), Specificaties (2 pagina's)

Pagina afdrukken

Olympus E-1 - Digital Camera SLR Snelstarthandleiding

VT429101

QuickStart Guide

START HERE

It is strongly recommended that you follow these

step-by-step numbered instructions to set up and

quickly begin using your new Digital Camera.

For more detailed instructions on advanced features, please refer

to the instruction manual.

PREPARE THE CAMERA FOR USE

Before you begin using your Olympus digital camera...

Attaching the strap

Attach the strap as shown below.

Charging the battery

The battery is not fully charged when purchased. Before use,

be sure to charge the battery with the specified provided

charger (BCM-1).

Hold the battery with its terminals facing the charger and

align the battery with the guideline (

shown in the illustration. Slide the battery into the charger.

Loading the battery

1) Make sure that the camera's

power switch is set to OFF.

TURNING ON THE

CAMERA

Turn the camera ON

• Power ON :

Set the power switch to ON.

Power switch

Focus mode lever

•

Set the focus mode lever to S.

Set the Date and Time

Although this is not required, it is recommended that you set the

date and time. This affects the way image file names are

created, and will conveniently include this information with

each picture. The date and time can also be set when the

camera is in the playback mode.

• Set the power switch to ON.

• Press

to display the menu.

• Press

three times to select

• Press

once to highlight

• Use

to select the date format.

• Adjust the date and time in the appropriate fields by using

to select the field, and

Repeat this step until all date/time fields have been set.

Note: Time is entered using the 24-hour format.

• Press OK twice to set the date and time and exit the menu.

OLYMPUS AMERICA INC.

Two Corporate Center Drive, Melville,

NY 11747-3157, U.S.A.

http://www.olympusamerica.com/E1/

) on the charger as

2) Turn the battery compartment lock to

open the battery compartment cover.

Battery

compartment

lock

Power OFF :

Set the power switch to OFF.

TIP: After a specified period of time elapses

with no operations being performed, the

camera enters the sleep mode (stand-by) to

save battery power. Press the shutter button

to wake up the camera.

(OPTIONAL)

, and then press

once.

to set the proper value.

OLYMPUS OPTICAL CO. (EUROPA) GMBH

Wendenstrasse 14-18, 20097 Hamburg, Germany

http://www.olympus-europa.com/

UNPACKING THE BOX CONTENTS

Gather your digital camera and the parts as shown in the illustration. You'll need these to complete the steps for the

camera set-up procedures that follow.

Digital camera

Strap

Cards (Compact Flash and Microdrive) are optional. The following items are also included in this package: Reference manual *

Basic Manual *

, video cable, warranty card, registration card (not pvovided in some areas), and safety precautions booklet.

*1 Provided as a pdf file on the CD-ROM in some areas.

*2 Provided in areas where the Reference Manual is on the CD-ROM.

3) Load the battery as illustrated.

Attaching a lens to the camera

1) Remove the body cap from the camera.

2) Remove the rear cap from the lens.

3) Align the lens attachment mark (red) on the camera

with the alignment mark on the lens (red), then insert the

lens into the camera's body

until you hear it click

Inserting the card

1) Turn the card cover lock in the direction of the arrow and open the card cover.

2) Insert the card fully with the

facing toward the monitor side (the camera's

rear side) as illustrated.

3) Close the card cover fully until it is

and

locked closed.

Battery

compartment

cover

Camera Diagram and Controls

Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.

White balance sensor

Self-timer/Remote

control lamp,

AF illuminator

Remote control

receiver

Preview button

Mount

(One-touch WB) button

(Attach the lens after removing the body

cap from the camera.)

Diopter adjustment dial

Main dial

Eyepiece shutter lever

Strap eyelet

Viewfinder

Monitor

(Shown with

removable monitor

cover attached.)

INFO (Information

display) button

(Protect) button

Arrow pad

(Erase) button

Battery compartment

lock

Battery compartment

cover

BLM-1 Lithium ion battery

BCM-1 lithium ion battery charger

CD-ROM

4) Close the battery compartment cover and turn

the battery compartment lock to

Direction indicating mark

. Rotate the lens clockwise

mark side

Card cover lock

When using

Compact Flash

(Exposure

Lens attachment mark

compensation) button

Mode dial

Power switch

Lens lock pin

Mode dial lock

Lens release

button

WB (White

balance) button

Mirror

Sub dial

Shutter button

AEL button

BKT (Auto bracket) button

Card access lamp

(AF frame

External flash

selection) button

connector

(Playback

Remote cable

mode) button

connector

(Menu) button

Card cover lock

OK button

Focus mode lever

Tripod socket

http://www.olympus.com/

USB cable

IEEE1394

(grey color)

cable

Alignment

mark (Red)

Lens attachment

mark (Red)

Mark

Card cover

Card slot

When using

Microdrive

Control panel

LIGHT (Control panel

illumination) button

ISO button

Hot shoe

(Flash mode) button

(Record mode) button

(Metering) button

DRIVE button

Connector cover

IEEE 1394

connector

USB connector

DC-IN jack

VIDEO OUT jack

Card slot

Eject button

Card cover

Printed in Japan