Olympus STYLUS VERVE S Basishandleiding - Pagina 8

Blader online of download pdf Basishandleiding voor {categorie_naam} Olympus STYLUS VERVE S. Olympus STYLUS VERVE S 27 pagina's. Olympus stylus verve: quick start
Ook voor Olympus STYLUS VERVE S: Brochure (2 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's)

Pagina afdrukken

000e_kisohen.book Page 8 Friday, July 30, 2004 7:06 PM

Safety precautions

Grounding, Polarization — If this product can be used with a specified AC adapter, the

adapter may be equipped with a polarized alternating current line plug (a plug with one

blade wider than the other). This safety feature allows the plug to fit into the power outlet

only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and

then reinsert it. If the plug still fails to fit, contact an electricalian and have the receptacle

replaced.

Protecting the Power Cord — The power supply cord should be placed so it will not be

walked on. Never put a heavy object on the power cord or wrap it around the leg of a

table or chair. Keep the area around the power cord connection points, at the power

outlet, and at the product connection, free of all AC adapter or accessory power cords.

Lightning — If a lightning storm occurs while using a specified AC adapter, remove it

from the wall outlet immediately. To avoid damage from unexpected power surges,

always unplug the AC adapter from the power outlet and disconnect it from the camera

when the camera is not in use.

Overloading — Never overload wall outlets, extension cords, power strips, or other

power connection points with too many plugs.

Foreign Objects, Liquid Spillage — To avoid personal injury caused by fire or electrical

shock from contact with internal high voltage points, never insert a metal object into the

product.

Avoid using the product where there is a danger of spillage.

Heat — Never use or store this product near any heat source such as a radiator, heat

stereo amplifiers.

Servicing — Refer all servicing to qualified personnel. Attempting to remove the covers

or disassemble the product, could expose you to dangerous high voltage points.

Damage Requiring Service — If you notice any of the conditions described below while

using a specified AC adapter, unplug it from the wall outlet and refer servicing to qualified

service personnel:

a) Liquid has been spilled onto the product or some other object has fallen into the

product.

b) The product has been exposed to water.

c) The product does not operate normally despite following operating instructions.

Adjust only the controls described in the operating instructions as improper

adjustment of other controls could damage the product and require extensive repair

work by a qualified technician.

d) The product has been dropped or damaged in any way.

e) The product exhibits a distinct change in performance.

Replacement Parts — When replacement parts are required, make sure that the service

center uses only parts with the same characteristics as the originals, as recommended by

the manufacturer. Unauthorized substitution of parts could result in fire, electrical shock,

or create other hazards.

Safety Check — Upon completion of servicing or repairs, ask the service technician to

perform safety checks to determine that the product is in good working order.

FCC Notice

Radio and Television Interference

Change or modifications not expressly approved by the manufacturer may void the user's

authority to operate this equipment. This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures: