Olympus BH2 Series Volledige demontage, reiniging en hermontage
Blader online of download pdf Volledige demontage, reiniging en hermontage voor {categorie_naam} Olympus BH2 Series. Olympus BH2 Series 40 pagina's. Phase contrast
Ook voor Olympus BH2 Series: Handleiding voor probleemoplossing en afstelling (46 pagina's), Volledige demontage, reiniging en hermontage (23 pagina's), Demontage, reiniging en hermontage (45 pagina's), Handmatig (6 pagina's), Installatiehandleiding (9 pagina's)
Pagina afdrukken
Complete Teardown, Cleaning,
and Reassembly of the Olympus
BH-2 Coaxial Focus Mechanism
All rights reserved. This document may not be reproduced or distributed, in whole or in part, for any commercial
purpose without the express written consent of the author ([email protected]). Permission is hereby granted to
distribute this PDF document in its entirety for personal, non-commercial purposes only, provided that the contents are
not modified in any way, including the copyright notices contained herein. This document may be freely distributed on
WWW, FTP, or BBS sites in accordance with these restrictions. The content of this document is provided for
informational purposes only, with no expressed or implied warranties whatsoever, including, but not limited to,
function, suitability, safety, accuracy, or completeness of information.
Revision
Description of Changes
1
*** Initial release ***
2
Revised 1.5mm Allen tool and Loctite 222 callouts. Corrected Figure 50 text.
Clarified hardware and tool types, revised method to clear setscrew heads of adhesive, added SHC220 grease option, revised
3
spring pre-loading procedure, and improved text readability of images.
4
Common formatting, added JIS screws text, clarified setscrew removal methods, updated Appendix 1 and coil preset
Complete Teardown, Cleaning, and Reassembly of the Olympus BH-2 Coaxial Focus Mechanism
Revision 4
Copyright © 2017, 2018, 2021 Carl Hunsinger
Revision History
Date
April 13, 2017
May 8, 2017
May 21, 2018
April 28, 2021
Revision 4
Page 1 of 40