Olympus BHS-313 Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus BHS-313. Olympus BHS-313 22 pagina's. System microscope
Ook voor Olympus BHS-313: Gebruiksaanwijzing (22 pagina's)
Pagina afdrukken
= Explanations in detail
@
Mounting
the halogen bulb
1) Releasing the bulb clamping levers @ of
the collector
lens @
in the direction of
the arrow, insert two contact
pins of the
halogen bulb into the socket ©. (Fig. 1)
(Recommended
to use a glove or gauze to
handle the halogen bulb.)
2) Secure the bulb in position with the two
levers.
*
Before use, wipe off any fingerprints or
stains on the bulb.
© Mounting the stage
1) Loosen the stage clamping screw © by
rotating counterclockwise.
(Fig. 2)
2)
Insert the stage
into the mounting
dove-
tail of the microscope stand slowly and
lock with clamping
screw.
@
Mounting the revolving nosepiece
1) Loosen the nosepiece clamping screw ©.
(Fig. 3)
2) Aligning the nosepiece dovetail slide to
the mounting block ©, push in the nose-
piece slowly all the way.
©
Mounting
the observation
tube
1) Loosen the clamping knob © fully. Pull
spring-loaded clamping
knob ©.
This
will cause the locating pin @ to withdraw.
(Fig. 4)
If the pin does not, loosen the
screw further until the pin withdraws.
2) With clamping knob © pulled out, insert
the
circular
dovetail
of
the
observation
tube into the ring dovetail.
3) Tighten
the clamping
knob.