Olympus BX52 Gebruiksaanwijzing - Pagina 16

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus BX52. Olympus BX52 37 pagina's. System

Fig. 18

Fig. 19

Fig. 20

Rotating the Stage

1. Slightly loosen the stage clamping screw @.

2. The stage can be rotated both clockwise and counterclockwise by the

stage clamping screw.

# A click may be heard and felt during rotation. However, this is due to

the construction of the substage and does not indicate a malfunc-

tion.

}The angle of rotation varies depending on the positions of the X- and Y-

axis knobs.

Right hand knobs

Left hand knobs

Adjusting the Stage Height

}By lowering the position of the substage, the microscope will accommo-

date specimens with maximum height of 35 mm. This is useful when

observing metallurgical specimens and other thick objects.

1 Lower the stage to the lower limit, then remove the stage from the micro-

scope.

2 Using the Allen screwdriver, loosen the substage bracket clamping screw

@ and remove the substage.

3. Turn the coarse adjustment knob and raise the focusing block ³ to

where the stopper screw ² on the arm becomes visible.

4. Using the Allen screwdriver, loosen and remove the upper stopper screw

².

5. Reattach substage bracket and stage.

Angle of Rotation

Clockwise

Counterclockwise

230°

20°

230°

(Figs. 19 & 20)

(Fig. 18)