Olympus BX60 Gebruiksaanwijzing - Pagina 19

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus BX60. Olympus BX60 48 pagina's. System microscope
Ook voor Olympus BX60: Snelstarthandleiding (4 pagina's)

Pagina afdrukken
Olympus BX60 Gebruiksaanwijzing
Metallurgical Microscopy
The following section outlines the operational procedures when the microscope o used to normal metallurgical rrucroscopy
(reflected light brigritfteldAJarkfield observation) with the brightfield/darkfiald vertical illuminator. In the case of the universal
vertical illuminator. the cube selector knob is replaced by a turret.
l. Select the cube according to the observation purpose. Set the cube selector
knob © to BF.
I
2
m
15
2. Disengage the filter slider © (left side of arm), analyzer i
slider 0. and NO filter from the light path. (Page 33)
3. Press the transmitted/reflected light selector switch to select the reflected
light mode. Turn ON the main switch and adjust the light intensity with the
light intensity lever. (At this point leave the light intensity preset button OFF.)
(Page 171
4. Place a specimen on the stage. (Page 22)
5. Turn the revolving nosepiece to engage the 10X objective. Bring the specie'
into focus.
6. Adiusi the mterpupillary distance of the eyepieces. (Page 2SI