Olympus BXC-CBB Gebruiksaanwijzing - Pagina 25

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus BXC-CBB. Olympus BXC-CBB 41 pagina's. Modular microscope assemblies hardware

Pagina afdrukken

(4) Safety Lock

Label: S-LOCK

Function: Laser is not emitted if not terminated.

Relating the safety lock terminal status to outer panels of the customer's device, Laser radiation can be avoided when the

panels are open.

Connector type: BNC

Terminal Condition

OPEN

Connect to GND (SHORT) Un-Lock (Laser enable)

* Return from "Locked condition": Connect "Terminal" to GND again. No need to reboot BXC-CBB.

3.11.3 Adjusting camera diopter

Adjust camera diopter using the following steps.

TIP:

Be sure to adjust camera diopter, to prevent the following issues.

1. Parfocal among objective lenses getting worse.

2. Auto-focusing performance getting worse.

Put a specimen on the stage.

Set the highest magnification objective lens in the light path.

Command: 1OB

Move the Z-stage and adjust focus on the specimen.

Set the lowest magnification objective lens in the light path. Be sure not to move the stage height.

Command: 1OB

Move the circular dovetail of the camera adapter and adjust focus on the specimen.

3. Setup procedures

Laser Condition

Lock (Laser disable)

3.11 Setting up BXC-FSU