Olympus CHA Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus CHA. Olympus CHA 15 pagina's.
Pagina afdrukken
III. ASSEMBLY
The picture below illustrates the sequential procedure of assembly. The numbers indicate
the assembly order of various components.
*
Take care at assembly to keep all glass surfaces clean and avoid scratching the lens surfaces.
® Eyepiece cap
knob of
~'"
Securely attach the mechanical
II\.
(J) Eyepiece
stage to the plain stage with
""">
the clamping screws and tighten
""-
them with a coin.
~
Observation tube
\
®
Objective
~
Observation tube
11
!
clamping screw
@
Mechanical stage
Stand
1
---------~g~~g~O~L-®~9~connect
the plug to
Clamping screws
~
th~outlet.
®
Condenser
~
A
Line cord
t
~~~
®
Filter mount
~
Pull down the locking
the lamp house cover.
Aligning the positioning dots on
condenser mount and condenser,
insert the condenser into the
mount from below and clamp
with condenser clamping screw.
Tungsten bulb
20WCHB
I
For CHB
I
®::J
Halogen
Lamp socket
bulb
CH-LSHB
I
ForCHA
I
0 - -
Q
I
For CHA
I
Tungsten bulb
6V10W
Q:::J
CD
After opening the lamp house
cover at the microscope base,
press the tungsten bulb socket
against the lamp mount, and
rotate clockwise.
*
For use of a halogen bulb, insert
its contact pins into the socket.
*
In case of the tungsten bulb, its
silver reflecting surface must be
positioned pointing to the base
plate.
*
Before use, wipe off fingerprints
or stains on the resPective bulbs.
4