Olympus FH Installatie-instructies - Pagina 2
Blader online of download pdf Installatie-instructies voor {categorie_naam} Olympus FH. Olympus FH 3 pagina's. Nanodyne replacement illuminator
Ook voor Olympus FH: Gebruiksaanwijzing (22 pagina's)
Pagina afdrukken
4
Nanodyne Replacement Illuminator for Olympus FH Microscope Installation Instructions: Step 1. Remove old lamp.
B
(1) Microscope with OEM lamp and power supply.
A
Copyright 2019 Nanodyne Measurement Systems. Document authorized for installation of Nanodyne equipment only. www.nano-dyne.com Wayne Bonin 651-323-8592
4
3
(2) Pull out the OEM lamp. It is just held in by friction.
(3) The small screw
(inset at left) needs to
be removed to install
the Nanodyne
illuminator.
Use a small jewelers
screwdriver. The
screw is on the inside,
opposite the hole the
red arrow points to.
3
2
(3) Lamp removed. Note that the inner portion of the lamp mount can move in and out when
the thumb screw is loosened.
2
1
Wayne Bonin
4/6/2019
PN 11275 Olympus FH Illuminator
REV
System Installation Instruction
2
2
3
SHEET
OF
1
B
A