Olympus SZH-CLJ Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus SZH-CLJ. Olympus SZH-CLJ 16 pagina's. Sz2-ila transmitted illumination attachment

Pagina afdrukken

Warnings

Warning engravings are placed at parts where special precaution is required when handling and using the unit. Always

heed the warnings.

Warning engraving

positions

Getting Ready

1. The transmitted light illumination attachment is a precision instrument. Handle it with care and avoid subjecting it to

sudden or severe impact.

2. Do not use the transmitted light illumination attachment where it is subjected to direct sunlight, high temperature and

humidity, dust or vibrations. (For the operating conditions, refer to Chapter 5, "SPECIFICATIONS" on page 7.)

Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and wipe

gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available absolute

alcohol.

Since the absolute alcohol is highly flammable, it must be handled carefully.

Be sure to keep it away from open flames or potential sources of electrical sparks -- for example, electrical

equipment that is being switched on or off.

Also remember to always use it only in a well-ventilated room.

2. Do not attempt to use organic solvents to clean the parts other than the glass components. To clean them, use a lint-free,

soft cloth slightly moistened with a diluted neutral detergent.

3. Do not disassemble any part of the equipment as this could result in malfunction or reduced performance.

4. When the microscope is not in use, be sure to set the main switch to "

has been cooled down, place the dust-prevention cover on the microscope for storage.

Caution

If the transmitted illumination attachment is used in a manner not specified by this manual, the safety of the user may be

imperiled. In addition, the equipment may also be damaged. Always use the equipment as outlined in this instruction

manual.

The following symbols are used to set off text in this instruction manual.

: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).

Lamp housing

(High Temperature

(U-LH100L-3)

warning )

" (OFF). After checking that the lamp housing

SZ2-ILA