Olympus SZX7 Gebruiksaanwijzing - Pagina 10
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus SZX7. Olympus SZX7 32 pagina's. Stereomicroscope system
Ook voor Olympus SZX7: Gebruiksaanwijzing (32 pagina's)
Pagina afdrukken
4
4-1 Stand
To decrease
4-2 Observation tube
6
Downloaded from
ManualsNet.com
Operation
Clamp
a
To increase
a
search engine
1
Using the stage
1
When reflected light illumination is used, the stage plate can be
placed either the white or black surface facing up depending on the
specimen. However, when the ESD performance is required, always
use the black surface of the stage plate.
2
When transmitted light illumination is used, use the transparent glass
stage plate (SP-C).
2
Adjusting the tocus adjustment knob tension
This operation is intended to facilitate the rotation of the
TIP
knobs while preventing spontaneous drop of the microscope
body. It is recommended to set the knob tension to a slightly
higher level than the point where spontaneous drop occurs.
1
Hold the left and right focus adjustment knobs a with both hands,
fix the left knob and rotate the right knob. The rotation tension of the
knobs increases or decreases according to the direction in which the
right knob is rotated.
2
If the rotation tension is increased too much, accurate focusing is not
possible and the mechanism may be damaged.
1
Adjusting the interpupillary distance
Always hold the eyepiece sleeves a with both hands
NOTE
when adjusting the interpupillary distance.
1
While holding the left and right eyepiece sleeves a with both hands,
look through the eyepieces and adjust for binocular vision until the
left and right fields of view coincide completely.