Olympus U-UVF248A Gebruiksaanwijzing - Pagina 15

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus U-UVF248A. Olympus U-UVF248A 20 pagina's. Motorized 248 nm uv microscope unit

Pagina afdrukken

Fig. 6

Fig. 7

...

Fig. 8

Attaching the Lamp Housing (Fig. 6)

1. Loosen the two lamp housing clamping screws @ of the UV248 light

source box.

2. Insert the mount seat ² of the lamp housing into the mount and tighten

the clamping screws @.

Attach the lamp housing and take care not to tilt it. Reserve enough

space around the lamp housing to ensure ventilation.

Resetting the Burner Hour Counter

Set the hour counter by referring to the instruction manual provided with

the power supply.

Attaching the UV Light Guide

Do not bend the UV light guide into a radius below 100 mm to

prevent it from breaking. Also do not place a heavy object on the

light guide or subject it to strong force.

1. Remove the protective rubber caps from the two ends of the light guide.

Handle the light guide carefully so as not to leave stain or damage on

the end surfaces.

2. Insert the input connector @ into the UV light guide mount ² on the

UV248 light source box by aligning the positioning marks, and tighten

the clamping ring ³.

3. Loosen the clamping knob | and insert the output connector ƒ all

the way. Clamp the connection so that the clamping knob | is aligned

with the positioning reference plane ....

Connecting Other Cables

1. Set the main switches of all of the modules equipped with main switches

to "

2. For safety, the connection of the power cord into the power outlet should

always be the last connected cable.

3. Be sure to connect each cable firmly.

" (OFF).

U-UVF248A

(Figs. 7 & 8)