Olympus FR-WR Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus FR-WR. Olympus FR-WR 14 pagina's. Wireless radiowave receiver

Frequency

This product uses the 2.4 GHz band for wireless communications. However,

other wireless devices may use the same frequency.

Setup

Group dial

Channel dial

Turn on the ﬂ ash.

• Refer to the ﬂ ash manual for details.

Press the ON/OFF button to turn on the wireless receiver.

• The ON/OFF lamp will light up.

Hold down the X-RCV button to select an operating mode.

• The X-RCV lamp is off: RCV mode (You set the ﬂ ash control mode and

• The X-RCV lamp is on: X-RCV mode (You set the ﬂ ash control mode and

Turn the group dial to select a communication group.

Set the ﬂ ash control mode and ﬂ ash intensity.

• RCV mode:

• X-RCV mode:

Turn the channel dial to select a communication channel.

• Select the same channel that you set on the wireless commander.

ﬂ ash intensity on the wireless commander. This

wireless receiver receives the setting information

and ﬁ ring signal from the wireless commander.

Then, the ﬂ ash that is connected to this wireless

receiver ﬁ res a ﬂ ash.)

ﬂ ash intensity on the ﬂ ash that is connected to this

wireless receiver. This wireless receiver receives a

ﬁ ring signal from the wireless commander. Then, the

ﬂ ash that is connected to this wireless receiver ﬁ res

a ﬂ ash with this wireless receiver's settings.)

Set the ﬂ ash control mode and ﬂ ash intensity on the

wireless commander.

Set the ﬂ ash control mode and ﬂ ash intensity on the

ﬂ ash that is connected to this wireless receiver.

X-RCV lamp/button

BEEP lamp/button

ON/OFF lamp/button