Olympus EMPOWER EMP-H35S Snelle referentiehandleiding - Pagina 7
Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} Olympus EMPOWER EMP-H35S. Olympus EMPOWER EMP-H35S 10 pagina's. Yag lasers
Pagina afdrukken
Activating the laser
To activate the laser, first put the laser in READY mode by pressing the READY button on the screen or
n
the circular button on the foot switch. If using the foot switch button, note that the button must be held
down for a few seconds to activate (until beep is heard). This is a safety feature to prevent accidental
button pressing.
Step on the foot pedal to activate the laser.
n
H35 Emission and Ready screens
Saving settings on the H65 and H100
On the H65 and H100, settings can be saved under presets to use again.
n
From the main screen, select the settings button and then choose presets.
n
In the Presets screen, select new to save current settings as a new preset. Enter a name for the preset
n
and click OK. This setting can be referenced again by selecting Presets on the home screen.
L A S E R O P E R A T I O N
H65 & H100 Emission and Ready screens
E M P - H 3 5 S , E M P - H 65 S & EM P -H 100 S QUI C K REF ER ENC E G UID E
7