Olympus MX61A Handmatig - Pagina 15
Blader online of download pdf Handmatig voor {categorie_naam} Olympus MX61A. Olympus MX61A 48 pagina's. Motorized 300 mm compatible semiconductor/fpd inspection microscope
Pagina afdrukkenASSEMBLY
2-1 Assembly Diagram
}The diagram below shows where the various modules should be
mounted. Study the assembly instructions for only the modules to be
employed.
For the connection of cables and power cord, see page 21.
# When assembling the equipment, make sure that all parts are free
of dust and dirt and avoid scratching any parts or touching glass
surfaces.
Eyepieces
SWH series
Motorized Revolving
Nosepiece
U-D6BDREMC
U-D5BDREMC
U-D6REMC
DIC Slider
U-P5BDREMC
U-DICRM
U-DICR
U-DICRH
U-DICRHC
Breath Shield
MX-BSH
MX-BSH-ESD-2
Brightfield
Objective
Adapter
BD-M-AD
Brightfield/
Brightfield
darkfield
objective
objective
Holders
(See pages 10 & 11.)
Stage
MX-SIC1412R2
MX-SIC8R
Video/digital camera
Photomicrography system
Observation Tube
MX-SWETTR
U-SWETTR-5
Intermediate Attachment
(Only one of the following
can be attached.)
U-UVF248IM
U-AFA2M
(+ MX-ANM)
U-CFU
Microscope Frame
MX61A-F
Hand Switch
MX-HS61A
}The tools used can be stored in the holes on the tool holder provided
with the microscope frame. Use the double-sided adhesive tape of the
tool holder to attach it to a position that does not hinder operation.
Do not attach the tool holder anywhere near the bottom of the lamp
housing since it generates high-temperature heat.
Tools Used
(Provided with the microscope frame)
Allen screwdriver (3 mm)
Allen wrench (3 mm)
Tool holder
Adapter
MX-HGAD
Filters
U-25D6-2
U-25ND25-2
U-25LBD
U-25IF550, etc.
Analyzer
U-AN360-3
Polarizer
U-PO3
MX61A
Lamp Housing
for Halogen Bulb
U-LH100-3
LH100IR
Halogen bulb
12V100WHAL-L
12V10WHAL
High-Intensit y
Lamp Housing
U-LH75XEAPO
U-LH100HG
LH100HGAPO
Control Board
U-ZPCB or
U-AFA2M-CB
+ U-DICPCB
Control Box
BX-UCB
Operation Unit
MX-OPU61A
Control Software
PC + MX2-BSW
12