Axminster AWSL Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Axminster AWSL. Axminster AWSL 20 pagina's. Woodturning lathes
Pagina afdrukken
Specific Safety Instructions for Woodturning Lathes..
9. Make sure your tools are stored/racked away from the turning area of the lathe. Do not
reach over a rotating workpiece at any time.
10. Do not 'dig in' or try to take too large a cut.
11. Do not leave the lathe running unattended; or leave the machine until everything is
stopped.
12. If you are turning between centres with 'softish stuff', check and reposition the tailstock
centre frequently.
13. Some turning tools may have specific sharpening angles that have been determined by
the manufacturers; when re-sharpening, adhere to these angles to maximise the finish of
your work.
Axminster No.
Motor
Headstock Spindle Thread
Headstock Spindle and Tailstock Barrel Tapers
Maximum Turning Diameter
Maximum Distance between centres
Maximum Distance between centres (Extension fitted)
Supplied Tool Rest Length
Speeds (5) (Variable Speed for AWVSL)
Supplied Faceplate Dia
Height
Width
Length (without extension bed)
(with extension bed) (OPTIONAL)
(NOT INCLUDING EXTENSION BED)
Weight
Please read the Instruction Manual prior to using your new machine; as well as the
operating procedures for your new machine, there are numerous hints and tips to help you
to use the machine safely and to maintain its efficiency and prolong its life. Keep this
Instruction Manual readily accessible for any others who may also be required to use the
machine.
Before commencing assembly, please read the parts description & identification so that you
can readily identify the parts. Remove the lathe from its packaging. Stand it on the bench.
Loosen the banjo lock and reposition to the required position, similarly with the tool rest.
Locate the handle for the tailstock control wheel and screw securely into the pre-threaded
hole in the wheel rim flange, using a flat blade screwdriver. If you are going to fit the
optional bed extension, follow the instructions that are in the box or see page 06.
Specification...
AWVSL
700241
240V a.c. 50Hz 375W
(1" x 8 tpi) T04M
2MT
240mm
440mm
1080mm
125mm
650 - 3200rpm
80mm
430mm
320mm
865mm
1300m
g
38k
(OPTIONAL)
Initial Assembly...
AWSL
700176
240V a.c. 50Hz 375W
(1" x 8 tpi) T04M
2MT
240mm
440mm
1080mm
125mm
760 - 3200rpm
80mm
365mm
205mm
865mm
1300m
g
38k
W
A X M I N S T E R
W H I T E
05