Axminster AWVSWL1200D Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Axminster AWVSWL1200D. Axminster AWVSWL1200D 19 pagina's. Woodturning lathe

Secure tool rest (A, Fig. 3) to tool rest body (B, Fig. 3) by tightening handle(C, Fig. 3).

Fig. 3

1. Headstock Lock Handle: (D, Fig.4) Locks head in position. Unlock handle to position the

head along lathe bed. Tighten handle when properly positioned.

2.. Headstock On/Off Button: (F, Fig.4) Pull the button out to turn "ON" the lathe. Push the

button in to turn the lathe "OFF".

3. Headstock RPM Knob: (G, Fig. 4) Turn knob to desired RPM. There are two speed

ranges offering "speed" (330-3200) and "torque" (100-1200).

4. Headstock For/Rev Switch: (H, Fig. 4) Use the toggle switch to change the direction the

spindle turns. Only change direction when the spindle has stopped.

5. Headstock RPM Readout: (I, Fig. 4) Displays the spindles RPM, see Figure 5.

6. Headstock Spur Center: (J, Fig. 6) Used for turning between centers. Spindle taper is

MT-2. Remove spur center by inserting drift rod through the opposite end of the spindle and

knocking spur center out.

Fig. 5

7. Headstock Faceplate: (K, Fig. 6) Used for turning bowls and plates. There are a number

of screw holes for mounting the workpiece. Thread the faceplate onto the spindle in a

WOODLATHE MANUAL

CONTROLS & FEATURES

Fig. 4

Fig. 6